÷Changing the mode settings

Notes

The file data for index screen is a available only on this camera.

If you attempt to record 55 images or above, “DISK FULL” appears on the LCD screen and you cannot record the image even when the remaining disk capacity indicator is not emptied.

320 × 240 size E-mail files are stored in another folder. The compression ratio is standard and does not depend on the image quality settings.

A remaining capacity of about 1MB is needed when recording in BITMAP mode. After recording the BITMAP picture, “DISK FULL” appears on the LCD screen.

The images recorded in VOICE mode are displayed one-size smaller than the other normal-sized images.

When the remaining disk capacity indicator flashes, image and sound data cannot be recorded.

QUALITY <FINE/STANDARD*>

•Select FINE when giving priority to image quality. •Select STANDARD as a standard image quality.

IMAGE SIZE < 640 x 480/

1024 x 768*>

Select a size of JPEG still image.

FLASH LEVEL < HIGH/ NORMAL*/ LOW>

•Select HIGH to make the flash level higher than normal. •Normally select NORMAL.

•Select LOW to make the flash level lower than normal.

28-GB