28 Turning Off the Power
Turning Off the Power
1Press the ?/1 key.
“POWER OFF? Please press ?/1 key
again.” appears to confirm that you want
to turn off the power.
The message disappears if you press any
key other than the ?/1 key, or if you do not
press any key for five seconds.
2Press the ?/1 key again.
The powered tilt adjuster is retracted
into the projector. The ?/1 key flashes in
green and the fan continues to run to
reduce the internal heat.
3Unplug the AC power cord from the
wall outlet after the fan stops running
and the ?/1 key lights in red. (Except
when using the Off & Go function)
When you cannot confirm the on-
screen message
When you cannot confirm the on-screen
message under certain conditions, you can
turn off the power by holding the ?/1 key for
about two seconds instead of above steps 1
and 2.
To project again immediately, you can make
the lamp light by turning on the power again
even, while the ?/1 key is flashing in green.
There may be a delay, depending on
conditions, before the lamp lights.
Note