Connecting the MD Walkman to your computer

After the software installation is completed, connect the MD Walkman to your computer.

1 Insert a recordable disc into the MD Walkman.

2 Insert a new dry battery into the MD Walkman, and connect the MD Walkman to the computer using the supplied dedicated USB cable.

To the USB connecting terminal

 

MD Walkman

Insert a new

Dedicated USB cable

dry batteryTo the USB jack/

 

 

dedicated jack
Computer

3 Check the connections.

When the connections have been properly made, “PCppMD”* appears in the display of the MD Walkman.

∗Depending on the MD Walkman, “Net MD” may be displayed.

Note

When using the MD Walkman connected to your computer, it is recommended that you use a new dry battery. We do not assure the results should there be a mis-operation, transferring failure, or destruction of audio data caused by insufficient battery power.

36