zVarious ways of playback

Playing tracks repeatedly

B

You can play tracks repeatedly in three ways- -all repeat, single repeat, and shuffle repeat.

PLAY MODE

PLAY MODE

To lock the controls D

To prevent the buttons from being accidentally operated when you carry the player, use this function.

Hold cover
HOLD

zPower sources

You can use the player on a dry battery, house current, or a Ni-MH rechargeable battery.

Using on a dry battery G

1 Insert one size AA (LR6) alkaline battery (not supplied) into the supplied battery case, and close the lid.

zAdditional information

Precautions

On safetyDo not put any foreign objects in the DC IN 1.5 V jack.On power sources

For use in your house: Use the AC power adaptor AC-E15L (not supplied). Do not use any other AC power adaptor since it may cause the player to malfunction.

Polarity of the plug
• The player is not disconnected from the AC
Notes on the batteries

Incorrect battery usage may lead to leakage of battery fluid or bursting batteries. To prevent such accidents, observe the following precautions:

Install the + and – poles of the batteries correctly.Do not try to recharge the batteries.

When the player is not to be used for a long time, be sure to remove the batteries.

If a battery leak should develop, carefully and thoroughly wipe away battery fluid from the battery compartment before inserting new ones.

Note on mechanical noise

The player gives out mechanical noise while operating, which is caused by the power- saving system of the player and it is not a trouble.

No sound comes through the headphones.•The headphones plug is not firmly connected.

bConnect the headphones plug firmly to the remote control. Then connect the remote control plug firmly to the 2/REMOTE jack.

•Volume is too low.bAdjust the volume by pressing VOL +/– .•AVLS is on.bSlide AVLS to NORM.

Specifications

System
Audio playing system

MiniDisc digital audio system

Press PLAY MODE while the player is playing an MD.Each time you press PLAY MODE, the play mode indication changes as follows.
Play mode indication
(none) (normal play)

Z

All the tracks are played once.

.

f” (all repeat)

All the tracks are played repeatedly.

.

f1” (single repeat)

A single track is played repeatedly.

.

f SHUF” (shuffle repeat)

All the tracks are played repeatedly in random order.

Tips on playback

To know the track name and time CPress DISPLAY on the remote control while the player is playing an MD.Each time you press DISPLAY, the display changes as follows.
DISPLAY
Elapsed time

Z

Track number

.

Track name

Track number

.

Disc name
Number of the track recorded on the MD.

Note

Disc and track names appear only with MDs that have been electronically labeled.

Slide the Hold cover on the player to cover the control buttons.

On the remote control, slide HOLD in the direction of the cto lock the controls.

To emphasize bass (DIGITAL MEGA BASS) E

The DIGITAL MEGA BASS function intensifies low frequency sound for richer quality audio reproduction.

DIGITAL MEGA BASS
Slide DIGITAL MEGA BASS.

Choose 1 (slight effect) or 2 (strong effect). To cancel the effect, set DIGITAL MEGA BASS to 0.

Note

If the sound becomes distorted when emphasizing bass, turn down the volume.

To protect your hearing (AVLS) F

The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your ears.

AVLS
Set AVLS to LIMIT.

The volume is kept at a moderate level, even if you try to turn the volume above the limited level.

2 Attach the battery case to the player.
Turn to LOCK side. To release the battery case, turn to RELEASE.
When to replace or charge the batteries

You can check the battery condition with the battery indication displayed while using the player.

BUsed batteries

v

bWeak batteries. Replace all the batteries

v

nThe batteries have gone out.“LoBATT” flashes in the display of the remote control, and the power goes off.

Battery life*
BatteriesPlayback

 

 

Ni-MHApprox. 6 hours
rechargeable

 

battery (NH-9WM (N))

 

 

 

One size AA (LR6)Approx. 8 hours
alkaline battery

 

 

 

One size AA (LR6)

 

alkaline battery

 

and a Ni-MHApprox. 16 hours

rechargeable

 

battery (NH-

 

9WM(N))

 

 

 

*The battery life may be shorter due to operating conditions and the temperature of the location.

Using on house current H

Before using the player, remove the rechargeable battery if it is installed.1 Attach the supplied battery case to the player.

2 Connect the AC-E15L AC power adaptor (not supplied) to the DC IN 1.5V jack of the player.

3 Connect the AC power adaptor to a wall outlet.
to wall outlet
to DC IN 1.5 V

Note

The battery indication ıis displayed while using the AC power adaptor.

power source (mains) as long as it is
connected to the wall outlet, even if the
player itself has been turned off.
• If you are not going to use this player for a
long time, be sure to disconnect the power
supply (AC power adaptor, dry batteries,
rechargeable batteries, or car battery cord).
To remove the AC power adaptor from the
wall outlet, grasp the adaptor plug itself;
never pull the cord.
• For use in the car: Use the CPA-9 car
connecting pack and the DCC-E215 car
battery cord (not supplied).
On chargingBe sure to use the supplied battery charger.Charging time may vary depending on the battery condition.

When you use the battery for the first time or after a long period of disuse, the battery life may be shorter. In this case, charge and discharge the battery several times. The battery life will be restored.

If the rechargeable battery capacity becomes half the normal life, replace it with a new one.

On heat build-up

Heat may build up in the player if it is used for an extended period of time. In this case, leave the player to cool down.

On installation

Never use the player where it will be subjected to extremes of light, temperature, moisture or vibration.

Never wrap the player in anything when it is being used with the AC power adaptor. Heat build-up in the player may cause malfunction or injury.

On the headphones
Road safety

Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in many areas. It can also be potentially dangerous to play your player at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations.

Preventing hearing damage

Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.

Caring for others

Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate of the people around you.

On the MiniDisc cartridgeDo not break open the shutter.

Do not place the cartridge where it will be subject to light, temperature, moisture or dust.

On cleaning

Clean the player casing with a soft cloth slightly moistened with water or a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzene as it may mar the finish of the casing.

Wipe the disc cartridge with a dry cloth to remove dirt.

Dust on the lens may prevent the unit from operating properly. Be sure to close the disc compartment lid after inserting or ejecting an MD.

If you have any questions or problems concerning your player, please consult your nearest Sony dealer.

Troubleshooting

Should any problem persist after you have made these checks, consult your nearest Sony dealer.

The player does not work or works poorly.•You tried to play with no disc in the player (“No DISC” flashes).bInsert an MD.•The remote control is locked.bSlide HOLD against the arrow to unlock the remote control.•Moisture has condensed inside the player.

bTake the MD out and leave the player in a warm place for several hours until the moisture evaporates.

•The rechargeable battery or dry battery is weak (n“LoBATT” flashes).bReplace the dry battery or recharge the battery.•The rechargeable battery or dry battery have been installed incorrectly.bInstall the battery correctly. •An MD with no recording on it isinserted (“BLANK” flashes).bInsert a recorded MD.

•The player cannot read the disc (it’s scratched or dirty) (“Err” on the player or “ERROR” on the remote control flashes).

bReinsert or replace the disc. •While operating, the player received a

mechanical shock, too much static, abnormal power voltage caused by lightning, etc.

bRestart the operation as follows.1 Disconnect all the power sources.2 Leave the player for about 30 seconds.3 Connect the power source.The MD is not played normally.•The player is set to the repeat mode (“f“ is displayed).bPress PLAY MODE repeatedly until “f“ disappears, then start playing.An MD is not played from the first track.•Disc playing stopped before it came to the last track.

bPress =repeatedly or eject and reinsert the MD once to go back to the beginning of the disc, and restart playing after checking the track number in the display.

Playback sound skips.•The player is placed where it receives continuous vibration.bPut the player on a stable place.A very short track may cause sound to skip.Sound has a lot of static.

•Strong magnetism from a television or such device is interfering with operation.

bMove the player away from the source of strong magnetism.

Charging the rechargeable battery does not start. (in case of the charger with a lid)

•The lid of the battery charger is not closed properly.bClose the lid and slide the switch on it.
Laser diode properties

Material: GaAlAs

Wavelength: λ = 790 nm

Emission duration: continuous

Laser output: less than 44.6 µW*

*This output is the value measured at a distance of 200 mm from the objective lens surface on

the optical pick-up block with 7 mm aperture.

Revolutions

400 rpm to 900 rpm (CLV)

Error correction

Advanced Cross Interleave Reed Solomon Code (ACIRC)

Sampling frequency

44.1kHz

Coding

Adaptive TRansform Acoustic Coding (ATRAC)

Modulation system

EFM (Eight to Fourteen Modulation)

Number of channels

2 stereo channels

1 monaural channel

Frequency response

20 to 20,000 Hz ± 3 dB

Wow and Flutter

Below measurable limit

Outputs

Headphones: stereo mini-jack, maximum output level 5 mW + 5 mW, load impedance 16 ohm

General
Power requirements

Nickel metal hydride rechargeable battery NH-9WM (supplied)

One size AA (LR6) battery (not supplied) Sony AC Power Adaptor AC-E15L1)(not supplied) connected at the DC IN 1.5 V jack

Battery operation time

See “When to replace or charge the batteries”

Dimensions

Approx. 82.5 ⋅ 19.1 ⋅ 80 mm (w/h/d)

(3 1/4 25/32 ⋅ 3 1/4 in.) not including projecting parts and controls

Mass

Approx. 115 g (4.1 oz.) the player only Approx. 155 g (5.5 oz.) incl. a premastered MD and a nickel metal hydride rechargeable battery NH-9WM

Supplied accessories

Battery Charger (1) Rechargeable battery (1) Rechargeable battery carrying case (1) Headphones with a remote control (1) Dry battery case (1)

Carrying pouch (1) Ear pad (2)

Optional accessories

AC-E15L AC power adaptor1)

Nickel metal hydride rechargeable battery NH-9WM

DCC-E215 Car battery cord CPA-9 Car Connecting Pack MDR-series Stereo headphones2) SRS-A41 Sony Active Speakers CK-MD4 MiniDisc Carrying Case CK-MD10 MiniDisc Filing Box

1)The operative voltage for the AC power adaptor varies depending upon the country in which it is sold. Therefore, purchase the AC power adaptor in the country you intend to use it.

2)Whether you should plug the headphones directly to 2/REMOTE on the main unit or to a remote control, use only headphones with stereo mini plugs.

stereo mini plugs

Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information about the accessories in your country.

US and foreign patents licensed from Dolby Laboratories Licensing Corporation.

Design and specifications are subject to change without notice.