Adding a track mark
You can add track marks so that the part after the new track mark is counted as a new track.
The track numbers will increase as follows.
1 |
|
| 2 | 3 |
| 4 |
| |
|
|
| 4 |
|
|
|
| |
| . | Track marking |
|
| ||||
|
|
|
|
|
|
|
| |
1 |
| 2 |
| 3 | 4 |
| 5 |
|
|
| Track numbers increase | ||||||
T MARK
1 While playing or pausing an MD, press T MARK on the recorder at the point you want to mark.
“MARK ON” appears in the display, and a track mark is added. The track number will increase by one.
To add track marks while recording
Press T MARK on the recorder or TRACK MARK on the remote control.
Note
TRACK MARK on the remote control does not function during playback.
Erasing a track mark
When you record with analog (line) input, unnecessary track marks may be recorded where recording level is low. You can erase a track mark to combine the tracks before and after the track mark. The track numbers will change as follows.
1 | 2 | 3 | 4 |
4
.Erase a track mark
12 3
Track numbers decrease
P =
T MARK
1 While playing the track with the track mark you want to erase, press Pto pause.
2 Find the track mark by pressing = slightly.
For example, to erase the third track mark, find the beginning of the third track. “00:00” appears in the display.
3 Press T MARK to erase the mark. “MARK OFF” appears in the display. The track mark is erased and the two tracks are combined.
z
When you erase a track mark, the date, time, and name assigned to the mark are also erased.
22