Connecting to a stereo system
Connect the i jack of the recorder to the LINE IN jacks of an amplifier or a tape recorder with a line cable
Stereo |
| |
(not supplied) |
| |
| ||
| Portable DAT | |
|
| |
|
| recorder, etc. |
| R (red) | to LINE IN |
to i |
| Stereo system, |
| etc. | |
L (white) |
| |
(not supplied) |
| |
|
| |
| 2 phono plugs |
When the recorder is connected to an another audio component through the supplied remote control.
When connecting a line cable (not supplied) to the headphones/ earphones jack of the remote control, be sure to set the “BEEP” setting to “BEEP OFF.” This keeps the beep sound out of the recorded signal or the output from the externally connected equipment.
1 Press ENTER, press <MENU,repeatedly until “BEEP” flashes in the display, and then press ENTER again.
2 Press <MENU,repeatedly until “BEEP OFF” flashes in the display, and then press ENTER.
To turn on the beep sound
Select “BEEP ON” in step 2.
39