Sony NAC-SV10i Entering text

18GB
Entering text
Entering text may be required during some setup
operations such as network settings. You can enter
text using the remote control.
ANumeric/text buttons
Press the button with the desired letter (ABC,
DEF, etc.). Press repeatedly until the desired
letter appears.
BCLEAR button
Press this button to erase a letter that was just
entered.
CCHARACTER button
This button selects the type of characters and
numbers. Each time you press the button, the
type of characters and numbers changes
between alphanumeric characters and numbers
(“abc” or “ABC”) and numbers only (“123”).
If you want to enter punctuation marks (e.g., !,
?, etc.) and other symbols (e.g., #, %, etc.),
select “abc” or “ABC.”
DM/m/</,/ENTER buttons
•M/m/</, buttons
Use these buttons to move the cursor.
• ENTER button
Use this button to enter a text string.
E button
Press this button so that the order of the
characters which are assigned to a button
appear in reverse. For example, pressing the
no. 2 button repeatedly normally displays “A,”
“B,” “C,” and “2,” however, pressing this
button changes the order to “2,” “C,” “B,” and
“A.”
Fa/A button
Press this button to switch between lowercase
(“abc”) and uppercase (“ABC”) letters.
Example of a character input
display
The display shown below is an example of the
character input display that appears when you are
searching for an item using a keyword.
How to enter text
1 Press CHARACTER (switch
between letters and numbers) and
a/A (switch between lowercase and
uppercase letters) to select the
desired type of characters and
numbers.
2 Press the corresponding numeric/
text button to enter the desired
character, then press , to move
the cursor to the next input position.
Repeat this step to enter the text string.
3 Press ENTER to confirm and save
the text string.
Other operations
To select the type of characters
and numbers
Press CHARACTER to select alphanumeric
characters and numbers (“abc” or “ABC”) or
numbers only (“123”).
To Do the following
Restore the previous
condition
Press BACK.
Move the cursor Press </, to move the
cursor left or right.
Press M/m so that the cursor
moves to the beginning or
to the end of the text string.
Current location of the cursor/
number of characters you have entered
Cursor
A symbol that indicates the
end of the text string
currently being entered
Type of
characters and
numbers