Sony NSR1050H/1T manual Specifications, NSRE-S200, NSBK-A16

Specifications

	NSR-1200	NSR-1100	NSR-1050H
Video/Recording
Number of cameras supported	Max. 64 (IP/Analog total)	Max. 32 (IP/Analog total)	Max. 20 (IP/Analog total)
Number of megapixel cameras to be connected	Max. 64	Max. 32	Max. 20
Number of megapixel cameras supported	Max. 8	Max. 4
at full resolution
Number of analog cameras	Option (NSBK-A16)		Max. 16
Video compression (IP camera)	MPEG-4 or JPEG
Video compression (Analog camera)	Option (NSBK-A16)		MPEG-4
Maximum recording rate (IP/Analog total)*1	480 fps VGA (640 × 480) at JPEG, 480 fps CIF (352 x 240)	240 fps VGA (640 × 480) at JPEG, 480 fps CIF (352 x 240)	120 fps VGA (640 × 480) at JPEG, 480 fps CIF (352 x 240)
Hard disk drives (Physical capacity)	2 TB (500 GB x4)	1 TB (500 GB x2)	500 GB (500 GB x1)
Hard disk drives (Interface)	Serial ATA
Hard disk drives (RAID level)	RAID 5	RAID 0	–
Hard disk drives (Recording capacity)	Approx. 1366 GB	Approx. 886 GB	Approx. 443 GB
Optical disc drive	DVD/CD Drive x1 (DVD-R, DVD+R, DVD-ROM, CD-ROM, CD-R, CD-RW)
Expansion storage	Supports NSRE-S200 (2000 GB) (Max. 7 Units)
Analog Camera Input

Analog camera interface

Video compression

Resolution

Maximum frame rate*2

Video Output

Option (NSBK-A16)

Video input x16, Audio input x4 (Supplied cable)

MPEG-4

NTSC : 704 x 480, 704 x 240, 352 x 240

PAL	: 704 x 576, 704 x 288, 352 x 288
NTSC : 120 fps 704 x 480,		240 fps 704 x 240, 480 fps 352 x 240
PAL	: 100 fps 704 x 576,	200 fps 704 x 288, 400 fps 352 x 288

Monitor OUT 1*3	HDMI™ (Type A) x1 and D-sub 15-pin x2 (Front and rear)
Monitor OUT 2*3	HDMI (Type A) x1 or D-sub 15-pin x1 (Rear)
Audio Output
Audio line OUT	RCA-pin L/R x1 Stereo Pair
Sensor Input/Alarm Output
Sensor input	8-channel photo-coupler (DC 3.3 to 24 V)
Alarm output	8-channel mechanical relay (Max. DC 24 V/ 1 A)
Other Interfaces
Ethernet*4	1000BASE-T/100BASE-TX/10BASE-T x4 (Auto switching)
USB	USB2.0 x3 (Front), USB2.0 x3 (Rear)
Serial interface (for UPS)	RS-232C : D-sub 9-pin x1
Serial interface (for analog camera control)*5	RS-232C : D-sub 9pin x1, RS-422/485 x1
Serial attached SCSI (SAS1.1)	SFF-8088 (mini-SAS 26-pin) x1
General
Dimensions (W x H x D)	17 x 3 1/2 x 16 1/2 inches (430 x 87 x 417 mm) excluding protrusions
Weight	Approx. 29 lb 12 oz (13.5 kg)	Approx. 26 lb 7 oz (12 kg)	Approx. 25 lb 6 oz (1.5 kg)
Power requirements	AC 100 V to 127 V/ 200 V to 240 V (50/60 Hz)
Power consumption	Approx. 265 W (typical) (Max. 350 W)	Approx. 185 W (typical) (Max. 350 W)	Approx. 175 W (typical) (Max. 350 W)
Operating temperature	41 to 104 ˚F (5 to 40 ˚C)
Operation humidity	20 to 80 %
Supplied accessories	Analog camera input cable (NSR-1050H only), Front panel key (2), Installation manual, First step guide, Monitoring window operations guide, Safety regulations,WEEE booklet,
	Warranty booklet, Rubber foot (4)

*1 With 16 cameras connected. JPEG compression by a standard rate. *2 Total of all the channels. Maximum frame rate for one channel is 30 fps (NTSC)/ 25 fps (PAL). *3 More than one connector cannot be used at a time. *4 Port #1 is for network connection. Port #2 is for connecting controlers. Port #3 and #4 is for the future expansion. *5 VISCA and Pelco-D are supported.

		NSRE-S200
Storage Capacity
	Physical capacity	2 TB (500 GB x4)
Hard disk	Interface	Serial ATA
drive	RAID level	RAID 5
	Recording capacity	Approx. 1396 GB
Interfaces
Ethernet		100BASE-TX/10BASE-T x1 (Auto switching) (For maintenance)
Serial interface		RS-232C x1 (For maintenance)
Serial attached SCSI (SAS1.1)		SFF-8088 (mini-SAS 26pin): input x1, output x2
General
Dimensions (W x H x D)		16.9 x 3.4 x 16.4 inches (430 x 87 x 417 mm)
		(Excluding protrusions)
Weight		Approx. 26 lb 7 oz (12 kg)
Power requirements		AC 100 to 127 V/200 to 240 V (50/60 Hz)
Power consumption		Approx. 80 W (typical) (Max. 350 W)
Operating temperature		41 to 104 ºF (5 to 40 ºC)
Operating humidity		20 to 80 %
Supplied accessories		Mini-SAS cable (1 m), Front panel key (2), Installation manual,
		Safety regulations,WEEE booklet,Warranty booklet, Rubber foot (4)

		NSBK-A16
Video / Audio Interfaces
	Number of analog input	Video input x16/Audio input x4
	Video compression	MPEG-4
Analog	Input video format	NTSC or PAL
input	Resolution	NTSC : 704 x 480, 704 x 240, 352 x 240
		PAL	: 704 x 576, 704 x 288, 352 x 288
	Maximum frame rate*6	NTSC : 120 fps 704 x 480, 240 fps 704 x 240, 480 fps 352 x 240
		PAL	: 100 fps 704 x 576, 200 fps 704 x 288, 400 fps 352 x 288
General
Dimensions (Board)		Approx. 6.6 x 2.5 inches (168 x 64 mm)(exclusive projections)
Cable length		Approx. 11.8 inches (300 mm)
Weight	Board	Approx. 2.5 oz (72 g)
	Cable	Approx. 8.3 oz (235 g)
	Input connector (Board)	DVI-connector
Connector Video input connector (Cable)		Composite BNC x16 (Black)
	Audio input connector (Cable)	RCA x4 (White)
Operating temperature		41 to 104 ˚F (5 to 40 ˚C)
Operating humidity		20 to 80 %
Supplied accessories		Analog camera input cable, Installation manual,Warranty booklet

*6 Total of all the channels. Maximum frame rate for one channel is 30 fps (NTSC)/ 25 fps (PAL).

Sony Electronics Inc.

1 Sony Drive

Park Ridge, NJ 07656

click: sony.com/security

S-IP2027-A (MK10552V2)

© 2009 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited.

Features and specifications are subject to change without notice. All non-metric weights and measurements are approximate.

Sony, IPELA, and DEPA are trademarks of Sony. Windows is a registered trademark of Microsoft Corporation.

HDMI is a trademark or a registered trademark of HDMI Licensing LLC.

Printed in USA (2/09)