Listening to music with your Network Walkman

Charge the battery (page 11) and transfer/record (only for NW-MS77DR) audio files to the built-in flash memory or MagicGate-compatible “Memory Stick Duo” (not supplied) (page 15 to 21) prior to listening to music.

Note

Be sure to remove your Network Walkman from the USB cradle or the recording USB cradle when operating your Network Walkman.

1 Put on the headphones.

Make sure that the plug cover is locked to your Network Walkman first. You can carry your Network Walkman with the supplied headphones and neck strap. When you use your Network Walkman while putting it in a pocket or bag, use the supplied extension cord. (Page 25 to 26)

1 Fold one end of the supplied neck strap as illustrated to clinch the headphone cord.

Lock the plug cover

Make sure that the supplied neck strap’s ends are secured to the headphone cord so it does not come loose.

2Place the neck strap around your neck as illustrated and fold the other end of the neck strap to clinch the headphone cord.

** NW-MS90D only (Non-US model) **

How to install the earbuds correctly

If the earbuds do not fit your ears correctly, low bass sound may not be heard. To enjoy better sound quality, adjust the earbuds position to sit on your ears comfortably or push them into the inside of your ears so that they fit your ears snugly. At purchase, M size earbuds are installed. If the earbuds do not fit your ears, try one of the other supplied sizes, S or L.

Note

When you adjust the length of headphone cord, hold the end of the neck strap.

22