Locking the controls (HOLD)

You can protect your Network Walkman against accidental operation by using the HOLD function when carrying it.

HOLD switch

Slide the HOLD switch in the direction of the arrow.

All operation buttons are disabled.

If you press buttons while the HOLD switch is on, “HOLD” blinks in the display.

To release the HOLD function

Slide the HOLD switch in the opposite direction of the arrow.

Storing data other than audio files

You can transfer data from the hard disk of your computer to the built-in flash memory or “Memory Stick” using Windows Explorer.

Either the built-in flash memory or “Memory Stick” is displayed in Windows Explorer as an external drive (for example: as the D drive).

When “Memory Stick” is inserted into the slot of your Network Walkman, only the data stored in “Memory Stick” will be displayed. If you want to display the data stored in the built-in flash memory, remove “Memory Stick” from the slot of your Network Walkman.

Note

You cannot operate the SonicStage software while operating the data storage function of your Network Walkman to use files stored in the built-in flash memory or “Memory Stick”. The error message “Cannot access the Device/media.” will be displayed when you try to operate both of them simultaneously.

32