Connecting to a VCR or TV
Connect your camcorder to the wall socket using the supplied AC Adaptor for this operation (p. 8). Refer also to the instruction manuals supplied with the devices to be connected.
A/V or A/V OUT* jack
| 1 |
|
|
AUDIO/VIDEO |
|
|
|
jacks |
|
|
|
(Yellow) | (White) | (Red) |
|
|
|
| VCRs or TVs |
To S VIDEO jack |
| To i.LINK |
|
|
| (IEEE1394) |
|
| 2 | jack |
|
|
| i.LINK compliant | |
|
|
| |
|
| 3 | device |
|
|
|
DV or 
DV OUT* Interface 
: Signal flow
*For
The jack works as an output only.
A/V connecting cable (supplied)
Connect the A/V connecting cable to your camcorder or the Handycam Station.
For
The A/V jack works as an input as well as an output, switching automatically depending on the operational status.
A/V connecting cable with S VIDEO (optional)
When connecting to another device via the S VIDEO jack, by using the A/V connecting cable with an S VIDEO cable (optional), pictures can be reproduced more faithfully than with the supplied A/V cable connection.
Connect the white and red plugs (left/right audio) and S VIDEO plug (S VIDEO channel) of an A/V connecting cable (optional). In this case, the yellow (standard video) plug connection is not necessary. S VIDEO connection only will not output
54 audio.
i.LINK cable (optional)
Use an i.LINK cable (optional) to connect your camcorder to another device. The video and audio signals are transmitted digitally, producing high quality pictures. Note that you cannot output the picture and sound separately.
•Connect the A/V connecting cable to the output jack of a device you are dubbing a picture from (for
•When you are connecting your camcorder to a monaural device, connect the yellow plug of the A/V connecting cable to the video jack, and the red (right channel) or the white (left channel) plug to the audio jack on the VCR or the TV.
•When you connect a device via an A/V connecting cable (supplied), set [DISP OUTPUT] to [LCD PANEL] (the default setting) (p. 50) to prevent the screen display dubbed with pictures.