CHAPTER 4.

OTHERS

4-1. Replacing the CPU

Fig.

Part No.

Description

 

1. Removing the CPU

 

 

 

 

 

J-2507-309-1

JIG FOR COU

3

25

1

6

 

4

1Install the special tool in the CPU.

2Insert a flat head (-) screwdriver tip into the groove as shown.

3While holding the special tool, slant the screwdriver in the direction of the arrow.

4The base under the CPU moves slightly in the direction of the arrow and the CPU lock is released.

5Remove the special tool.

6The CPU can be removed upward.

2. Installing the CPU

NOTE :

Attach the CPU while aligning the cut-out with this position.

2

1

3

5

4

1Insert all pins of the replacement CPU into the holes of the base and push the CPU in the direction of the arrow.

2Install the special tool in the CPU.

3Insert a flat head (-) screwdriver tip into the groove as shown.

While holding the special tool, slant the

screwdriver it in the direction of the arrow.

4The base under the CPU moves slightly in

the direction of the arrow and the CPU is locked.

5Remove the special tool.

NOTE :

•Do not use screwdrivers having a large tip than the width of the groove. Otherwise, it may cause the groove to be damaged.

•When installing the special tool in the CPU, align the convex of the base.

Confidential

4-1

PCG-FXA53/FXA59(AM)

(END)