5-1. Main Section
Ref.No. | Part No. | Description | Ref.No. | Part No. | Description | |
1 | COMPLETE PWB |
| 51 | FOOT (F) | ||
2 | FLEXIBLE FLAT CABLE (10 CORE) |
| 52 | COVER (BOTTOM R) ASSY | ||
3 | ENCODER (ROTARY) |
| 53 | LID (ETHER) | ||
4 | BRACKET (JOG) |
| 54 | LID (VGA) ASSY | ||
5 | DETECTOR, LATCH |
| 55 | COVER AIR DUCT | ||
6 | BUTTON (PAD) R |
| 56 | BATTERY, NICKEL HYDROGEN | ||
7 | BUTTON (PAD) L |
| 57 | HARNESS (POWER 3PIN) | ||
8 | LENS (PALM REST) |
| 58 | COMPLETE PWB | ||
9 | HOUSING (PALM REST) |
| 59 | FLEXIBLE FLAT CABLE (12 CORE) | ||
10 | COVER, LENS |
| 60 | SPRING (BT), COMPRESSION COIL | ||
11 | COVER (BOTTOM LF) |
| 61 | FLEXIBLE FLAT CABLE (10 CORE) | ||
12 | COVER (BOTTOM LR) |
| 62 | COMPLETE PWB | ||
13 | ESCUTCHEON (PAD) |
| 63 | COMPLETE PWB | ||
14 | INSULATOR (PAD) |
| 64 | CLAMP | ||
15 | PAD, TOUCH |
| 65 | SHEET (CPU), THERMAL | ||
16 | CABLE, FLEXIBLE FLAT (12 CORE) |
| 66 | GND GASKET 5X15X1 | ||
17 | BRACKET, SPEAKER |
| 67 | SHEET (COVER LR) | ||
18 | FLEXIBLE FLAT CABLE (8 CORE) |
| 68 | CUSHION HDD CONNECTOR | ||
19 | SPEAKER (16MM, WITH HARNESS) R |
| 69 | SHIELD CNX 1 | ||
20 | CUSHION, SPEAKER |
| 70 | SHEET (MODEM) | ||
21 | COMPLETE PWB |
| 71 | SHIELD MBX 1 | ||
22 | CUSHION BUTTON PW |
| 72 | INSULATING SHEET | ||
23 | BUTTON (PW) |
| 73 | FOOT (R2) | ||
24 | SPEAKER (16MM, WITH HARNESS) L |
| 74 | IC | ||
25 | HOUSING (FRAME) ASSY |
| 75 | JACK (SMALL TYPE) 1P (HEAD PHONE) | ||
26 | COVER (BP) |
| 76 | CONNECTOR, USB | ||
27 | KEY BOARD UNIT (LA) |
| 77 | JACK, DC | ||
28 | FAN, DC (WITH HEATSINK) |
| 80 | JACK, SMALL TYPE (MIC) | ||
29 | CONNECTOR, PC CARD 1 SLOT |
| 81 | SPACER PC CARD FRAME | ||
30 | SHEET (GMCH), THERMAL |
| 82 | SPACER (PALM REST) | ||
31 | SHEET (PC CARD), INSULATING |
| 83 | CUSHION (COVER LR) | ||
* 32 | HEATSINK |
| B1 | ACE (M2), LOCK (2X4) | ||
* 33 | BRACKET (VGA) |
| B2 | SCREW (DIA. 1.4X3.5), PRECISION | ||
34 |
| B3 | ACE (M2), LOCK (2X6) | |||
* 35 | BRACKET (CPU) |
| B5 | TAPPING (M2) (2X4) | ||
36 | HARNESS (2 PIN) |
| B6 | SCREW (HEX) | ||
37 | CARD, MODEM |
| B7 | ACE (M2) (DIA. 4.6), LOCK (2X2.5) | ||
38 | SHEET (BOTTOM), INSULATING |
| B8 | SCREW +P 2X3 | ||
39 | HARNESS, |
| B9 | SPACER (MBX) | ||
40 | LID (DOC) ASSY |
| B10 | SCREW M3X4 | ||
41 | COVER (BBL) |
| B11 | ACE (M2), LOCK (2X5) | ||
42 |
| B12 | ACE (M2) (DIA. 4.6), LOCK (2X3.5) | |||
43 | COVER (BBR) |
| B14 | ACE (M2) (DIA. 4.6), LOCK (2X3.5) | ||
44 | FPC (HDD) |
|
|
|
| |
* 45 | BRACKET (HDD R) | * | To paste the thermal sheet (CPU) (65) to the heatsink | |||
46 | ASSY HDD 30GB (TO, 15, F) (S) |
| (CPU), warm the thermal sheet (CPU) adequately until it | |||
| becomes soft. |
| ||||
* 47 | BRACKET (HDD F) |
| For further information, refer to the removal (page |
48
49
50
Confidential