Assigning track names with text data from another application

You can use a text editor such as Notepad to enter track names in advance, and then use the data to assign names to all tracks in a single operation.

Before you begin

Only alphanumeric characters and the symbols listed below can be used in disc and track names:

! ” # $ % & ’ ( ) * + , – . / : ; < = > ? @ _ ‘

All other characters will not be correctly displayed.

Disc or track names cannot be recorded or edited on a write- protected MD. To do so, first slide the write-protect tab on the MD to enable writing.

1 Type in the track names as shown in the example below, using Notepad or other text editing software.

Example Track name of the third track<ENTER> Track name of the fourth track<ENTER> Track name of the fifth track<ENTER>

:

Track name of the eighth track<ENTER>

2 Copy the text and paste it to the clipboard using the editing menu of the text editing software.

The copy and paste procedure may vary according to the text editing software. For details, refer to the instructions provided with the text editing software.

3 Click the track name of the track (in the Track Name display) that you want to name.

Following the example text given in step 1, click the third track. The edit mode for entering track names is activated.

50