n N

49

Upgrading your VAIO computer

Viewing the amount of memory

To view the amount of memory, proceed as follows:

1Turn on the computer.

2Click the Start button, point to All Programs, Security & Utilities, then VAIO System Information, and click VAIO System Information again.

You can view the amount of installed memory here.

Adding / replacing a memory module

If you are not familiar with upgrading memory on a computer, we highly recommend that you contact your dealer.

To add or change a memory module, proceed as follows:

1Shut down the computer, unplug it, and remove any peripheral devices.

2Wait for the computer to cool down.

The inside of the main unit becomes very hot during operation. Wait for about one hour for the computer to cool down before opening the unit.

3With the main unit’s back panel facing you, slide the back panel up until you cannot go any further. As you slide the back panel up, a ’button’ appears (middle of the back of your computer).

4When you push this button, you can remove the back panel completely.

5Set the back panel aside.

A metal panel, the ’memory cover’, appears.

6Remove the 2 screws with a + screwdriver and remove the memory cover.

7To remove an existing memory module, release the end latches and gently lift out the module, as shown (may vary from actual configuration):