Note
If you must press “0” on your telephone to hear the tone signal and place an outgoing call, you can not use your telephone line for Internet access using the Access Point.
If you hear the tone signal when you pick up the receiver even though you must press “0” to place an outgoing call, you can use your telephone line for Internet access using the Access Point. In these situations, enter “0” before the telephone number for Phone Number 1 and Phone Number 2.
zTips
•Phone Number 2 is the alternate telephone number to use when a call to Phone Number 1 is not completed.
•Your Internet Service Provider may specify the DNS server(s). In this case, enter data for DNS Server 1 (DNS Server 2).
Note
The indicators on the Access Point flashes while changes to the settings are processed.
The link test is disabled until the Access Point POWER indicator turns green.
(It takes approximately 30 seconds before the POWER indicator turns green.)
Phone Connection:
The Enter Phone Connection Parameters dialog box appears.
1 Enter data for Account ID, Password, Password
The confirmation dialog appears.
2 Make sure you have made correct settings, then click NEXT.
Changes to the Access Point settings are reflected and the Finish screen appears.
3 Click LINK TEST.
The link test between the Access Point and the computer is performed.
When the confirmation dialog box appears, click FINISH to exit.
51