153
Saving and Loading Scene Files
Chapter 6 Saving and Loading the User Setting Data
2Turn the MENU knob until the page which
contains the desired file appears.
3Press the MENU knob, then turn the MENU knob
to move b to the desired file number, and press the
MENU knob.
The message “RECALL OK? YES b NO”
appears.
3
To carry out the recall, select YES and press the
MENU knob.
To cancel, press the MENU knob leaving b pointing to
NO.
When the loading is completed, the message
“COMPLETE” appears. The camcorder is set up
according to the loaded scene file. If no file is present
with a particular file number, this is shown as “NO
FILE”.

To load scene files from the “Memory

Stick” into the camcorder memory

You can load up to five scene files stored in the “Memory
Stick” into the camcorder memory all in a single operation.
(How to select an item in the menu screen: Turn the
MENU knob to move the b mark to the desired item.)
1
Display the SCENE FILE page of the FILE menu, and
press the MENU knob.
For details on menu operations, see “Basic Menu
Operations” on page 131.
2
Select SCENE RECALL, and press the MENU knob.
The SCENE RECALL page appears.
3
Turn the MENU knob until the SCENE RECALL
page which contains the desired scene files appears.
4
Press the MENU knob. Then select 5FILE LOAD B
MEM 1-5, and press the MENU knob.
The message “RECALL OK? YES b NO” appears.
5
To carry out the recall, select YES and press the
MENU knob.
To cancel, press the MENU knob leaving b pointing to
NO.
When loading is complete, the message
“COMPLETE” appears and the access indicator goes
off.
• The scene f iles loaded from the “Memory Stick”
overwrite data saved in the camcorder memory.
• To load the sc ene file saved in the camcorder memory
when the “Memory Stick” is inserted, return to the P00
SCENE RECALL page and load the desired scene file in
the camcorder memory.
• When ther e is no file to be loaded (shown as “NO
FILE”), an existing file of the same number is
unaffected. In the example shown in step 4, MEM(3) is
not overwritten.
Resetting the Settings of the Camcorder to the Standard Settings
You can reset the settings of the camcorder to the standard
settings.
(How to select an item in the menu screen: Turn the
MENU knob to move the b mark to the desired item.)
1
Display the SCENE FILE page of the FILE menu, and
press the MENU knob.
For details on menu operations, see “Basic Menu
Operations” on page 131.
2
Select STANDARD, and press the MENU knob.
DISPLAY MODE : F.ID
MEM-1:STANDARD
MEM-2:STANDARD
MEM-3:STANDARD
MEM-4:STANDARD
MEM- 5:NO FIL E
ESC?P00 SCENE RE CALL
DISP LAY MODE : ALL
001. SCENE1
002. SCENE2
003. NO FILE
004. SCENE4
005. SCENE5
***. 5FILE LO AD ME M1-5
ESC P01 SCENE RE CALL
RE CALL OK? YES N O
Notes
DISP LAY MODE : ALL
001. SCENE1
002. SCENE2
003. NO FILE
004. SCENE4
005. SCENE5
***. 5FILE LO AD ME M1-5
ESC P01 SCENE RE CALL
RE CALL OK? YES N O