Sony PEGA-KB11 Viewing The Help, Troubleshooting, Specifications, Notes on use, Assigning Application Shortcut Keys, Setting the Pointer, Change the pointer rate

Assigning Application Shortcut Keys

You can assign application shortcuts to the 1 - 9 keys at the top of the keyboard.

1Turn on your CLIÉ handheld, and tap the

[Keyboard] icon on the home screen.

The most recent settings screen appears.

2Tap V in the upper right corner of the Generalsettings screen, and select [CmdKeys].The CmdKeys settings screen appears.

3Tap V to the right of any Cmd+number key ([Cmd+1] through [Cmd+9]), and select the application you want to assign to the Cmd+number key.

4After setting application shortcuts, tap the icon to return to the home screen.

zTesting the application shortcut you have set

Press the numerical key (1-9) to which you have assigned an application shortcut in Step 3 while pressing the Cmd key on the keyboard to make sure that the assigned application starts correctly. If the application does not start, assign the application shortcut again.

Setting the Pointer

The pointer can be displayed on your CLIÉ handheld. The pointer function is set to off at the factory default setting. To activate the function, follow the procedures below.

1Turn on your CLIÉ handheld, and tap the

[Keyboard] icon on the home screen.

The most recent settings screen appears.

2Tap V in the upper right corner, and select

[Pointer].The Pointer settings screen appears.3Tap the check box of [Enable Screen Pointer] to tick the item.

4After setting, tap the icon to return to the home screen.

Use the pointer on the display of your CLIÉ handheld

1Hold Alt key on the home screen or other application screen.The pointer appears on the screen.2Move the pointer using the arrow keys (Alt + T, t,R, and r).3Move the pointer on the item you want to select, and press Alt + Enter.The item that the pointer is located is selected.

Change the pointer rate

Change the [Pointer Acceleration] and [Maximum Speed] by dragging the marker arrows with your stylus in the pointer settings screen.

Changing the pointer size

Tap V to the right of [Pointer Size] in the Pointer settings screen to change the pointer size.

Changing Other Settings

3Tap V to the right of [Tab], and select either setting.4After setting the tab movement, tap the icon to return to the home screen.

Using the Jog Dial function with the keyboard

You can select the list item or the menu with the keys on the keyboard just like you use Jog Dial.

1Press the R or r arrow key while pressing the Cmd key on the home screen or other application screen.

The selected icon or item appears inverted.2Press the Enter key while pressing the Cmd key on the item to be selected.The item that appears inverted is selected.

Disabling the Jog Dial functions

You can suspend the Jog Dial functions temporarily. The Jog Dial functions are enabled at the factory default setting.

1Turn on your CLIÉ handheld, and tap the [Keyboard] icon on the home screen.

The most recent settings screen appears.

2Tap V in the upper right corner of the General settings screen, and select [Layout].

The Layout settings screen appears.

3Tap the check box of [Enable Jog-Dial] to remove the tick on the General settings screen.

The Jog-Dial functions are suspended, and you cannot use the Jog-Dial navigator from your keyboard.

4After setting, tap the icon to return to the home screen.

To use the Jog-Dial navigator again, tap the check box of [Enable Jog-Dial] to tick the item on the Layout settings screen.

Viewing Layout information

Tap [Layout Info] at the lower left corner of the Layout settings screen. The current key layout setting and copyright are displayed.

Tap [Manage Layouts] in the lower right corner of the Layout setting screen to view the information when the function is extended.

Viewing The Help

You can view the explanation for main terms and functions, and keyboard shortcuts.

1Turn on your CLIÉ handheld, and tap the

[Keyboard] icon on the home screen.

The most recent settings screen appears.

2Tap V in the upper right corner of the General

settings screen, and select [Help].The Help screen appears.For a complete list of these shortcuts, refer to the shortcut lists below.

After viewing the shortcuts

Tap the icon to return to the home screen.

Shortcut list of cursor movements

The following list shows the keyboard shortcuts for moving the cursor and selecting text.

To use on-screen button shortcuts, perform one of the following procedures;

-Enter the button name while pressing the Fn key.

-Enter the first letter of the button name that is not used in the button name, or other one letter while pressing the Ctrl and Cmd keys at the same time.

Keys to press	Function
Fn + Details	Selects Details.

Ctl + Cmd + n	Selects Done.

Ctl + Cmd + l	Selects Details.

List of the menu commands

The following list shows the keyboard shortcuts for the editing menu commands.

Keys to press	Function
Ctl + x	Cuts selected text.

Ctl + c	Copies selected text.
Ctl + v	Pastes cut or copied text.

*The cut, copy, and paste menu commands may vary depending on the applications.

List of other special keystrokes

The following list shows other key combinations available on this keyboard.

Keys to press	Function
Fn + Cmd	Enters shortcut mode.
Fn + = ( )	Turns the backlight on/off.

List of Accented characters

The following list shows the example for inputting accented letter "a". To input other accented letter, type the desired letter instead of letter "a" in the list.

Keys to press	Function
a + Fn + ‘	Acute accent (á)

a + Fn + ^ (Fn-Shift-6)	Circumflex accent (â)

a + Fn + ;	Dieresis accent (ä)
a + Fn + `	Grave accent (à)

a + Fn + ~ (Fn-Shift-`)	Tilde accent (ã)

a + Fn + o	Dot accent (å)

List of other extended characters

Keys to press	Function
Fn + O (Fn-Shift-o)	Capital naught (Ø)

Fn + o	Lowercase naught (ø)
Fn + ? (Fn-Shift-/)	Upside down ? (¿)

Fn + ! (Fn-Shift-1)	Upside down ! (¡)

Fn + A (Fn-Shift-a)	Æ
Fn + a	æ

Fn + b	ß

Fn + w	Bullet (•)
Fn + c	Cedilla (ç)

List of Creating symbols

Keys to press	Function
Fn + g	Copyright symbol (©)
Fn + d	Degree symbol (˚)

Fn + <hyphen>	Divide symbol (÷)

Fn + u	Micro symbol (µ)
Fn + \	Paragraph symbol (¶)

Fn + p	British Pound symbol (£)

Fn + r	Registered trademark (®)
Fn + s	Section symbol (§)

Fn + t	Trademark symbol (™)

Fn + y	Yen symbol (¥)
Fn + + (Fn-Shift-=)	Plus/minus symbol (±)

Fn + 2	1/2

Fn + 3	3/4
Fn + 4	1/4

Fn + $ (Fn-Shift-4)	Cents (¢)

Fn + f	Script f (ƒ)
Fn + [	Left single curly quote (‘)

Fn + ]	Right single curly quote (’)

Fn + { (Fn-Shift-[)	Left double curly quote (“)
Fn + } (Fn-Shift-])	Right double curly quote (”)

Note

Make sure to set the Caps lock to off when you input the characters other than letters using the on-screen button shortcuts.

Troubleshooting

Nothing happens when you type on the keyboard.-Check that your CLIÉ handheld is charged.-Make sure that your CLIÉ handheld is connected to the keyboard correctly.-Confirm that the application for this keyboard is installed properly.-Confirm that the application for this keyboard is enabled.

A HotSync operation cannot be performed when you connect this keyboard to your CLIÉ handheld.

-You cannot use this keyboard as a cradle for your CLIÉ handheld. To perform a HotSync operation, remove the

keyboard, and attach a cradle to your CLIÉ handheld.HotSync screen appears when you connect this keyboard to your CLIÉ handheld.

-The driver may not be installed correctly. Delete the current driver, and install the driver again.

If the installed driver is not deleted, operational

malfunction may occur. In this case, perform a soft reset following the operation manual of CLIÉ handheld.

The keyboard operations suddenly stops.

-The keyboard may not function if you perform a soft reset when the keyboard is connected to your CLIÉ hendheld. Disconnect the keyboard before performing a soft reset on your CLIÉ handheld. Do not connect the keyboard to your CLIÉ handheld while it is starting again.

Specifications

Power consumption	7.5 mW (in normal operation)
Operating temperature	41 ˚F to 95 ˚F (5 ˚C to 35 ˚C)
Dimensions	3 3/4 ⋅	5 1/8 ⋅ 7/8 inches
	(93 ⋅	130 ⋅ 22 mm) (w/h/d)
	(Excluding the largest projecting
	part)
Mass.	Approx. 8.6 oz (244 g)
Accessories	Operating Instructions
	Installation CD-ROM

Carrying pouchWarranty cardsEnd-User’s Lisense AgreementDesign and specifications are subject to change without notice.

Notes on use

•Do not subject the unit to:–Extreme heat or cold–Dust, dirt, or sand–High humidity–Vibration–Strong magnetic fields–Mechanical shock–Direct sunlight (for extended periods of time)•Do not drop the unit.

•Be sure that nothing metallic comes into contact with the metal parts of this unit. If this happens, a short circuit may occur and the unit may be damaged.

•Do not operate the unit if it has a damaged cord or if it has been dropped or damaged.

•Always keep the metal contacts clean.•Do not disassemble or convert the unit.•While the unit is in use, it gets warm. This is normal.Cleaning

Clean the unit with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish.

Changing the key layout setting		Keys to press	Function	Using the International Keyboard Settings
Changing the key layout setting		Ctrl + T	Moves the cursor one word to the
You can change the key layout of the keyboard.		Ctrl + T	Moves the cursor one word to the
You can change the key layout of the keyboard.			left.	The Palm OS International keyboard settings are supported
1 Turn on your CLIÉ handheld, and tap the [Keyboard]			left.
				by the keyboard software which is preinstalled from the
		Ctrl + t	Moves the cursor one word to the	by the keyboard software which is preinstalled from the
icon on the home screen.		Ctrl + t	Moves the cursor one word to the	supplied CD-ROM. To input characters using the settings,
icon on the home screen.			right.
The most recent settings screen appears.				press the Alt key and the desired character.
The most recent settings screen appears.		Ctrl + Shift + T	Highlights the word to the left of	press the Alt key and the desired character.
2 Tap V in the upper right corner of the General		Ctrl + Shift + T	Highlights the word to the left of
2 Tap V in the upper right corner of the General			the cursor.	List of calculator functions
settings screen, and select [Layout].		Ctrl + Shift + t	Highlights the word to the right of	List of calculator functions
settings screen, and select [Layout].		Ctrl + Shift + t	Highlights the word to the right of	The following list shows the key combinations for calculator
The Layout settings screen appears.			the cursor.
				functions.
3 After setting the key layout, tap V to the right of		Shift + T	Highlights the character to the left	functions.
3 After setting the key layout, tap V to the right of		Shift + T	Highlights the character to the left
[Layout], and select a key layout.			of the cursor.		Keys to press	Function
[Layout], and select a key layout.		Shift + t	Highlights the character to the		Keys to press	Function
		Shift + t	Highlights the character to the		+, –, *, /, =	Adds, Subtracts, Multiplies,
			right of the cursor.		+, –, *, /, =	Adds, Subtracts, Multiplies,
			right of the cursor.			Divides, and Equals
						Divides, and Equals
		Shift + R	Highlights one line of text above
		Shift + R	Highlights one line of text above		c	Clears all
			the cursor.		c	Clears all

					e	Clears last entry
		Shift + r	Highlights one line of text below		e	Clears last entry
		Shift + r	Highlights one line of text below		m	Clears memory
			the cursor.		m	Clears memory
			the cursor.		p	Puts a currently displayed number

		Cmd + T	Moves the cursor to the top of the
		Cmd + T	Moves the cursor to the top of the			into memory.
			line.**			into memory.
			line.**		r	Recalls a value in memory.

		Cmd + t	Moves the cursor to the end of the
		Cmd + t	Moves the cursor to the end of the
			line.**
4 After setting the layout, tap the	icon to return to	Fn + R or Cmd + R	Scrolls upward.
the home screen.		Fn + r or Cmd + r	Scrolls downward.
		Shift + Tab	Tabs forward through fields.*
Changing the tab key movement		Tab	Tabs backward through fields.*

You can set the tab key to either move within fields or move to a tab stop when the tab key is set in the application you use.

1Turn on your CLIÉ handheld, and tap the [Keyboard] icon on the home screen.

The most recent settings screen appears.

2Tap V in the upper right corner of the General settings screen, and select [Layout].

*It may not function depending on the types of applications.

**If you type the sentence of more than one line, the cursor may not move as the table shows above, depending on the types of applications.

zTo use the keys on which the blue characters are printed

Press each key while holding the Fn key to access the commands that are printed in blue.

The Layout settings screen appears.

Assigning Application Shortcut Keys

Setting the Pointer

Use the pointer on the display of your CLIÉ handheld

Change the pointer rate

Changing the pointer size

Changing Other Settings

Using the Jog Dial function with the keyboard

Disabling the Jog Dial functions

Viewing Layout information

Viewing The Help

After viewing the shortcuts

Shortcut list of cursor movements

To use on-screen button shortcuts, perform one of the following procedures;

List of the menu commands

List of other special keystrokes

List of Accented characters

List of other extended characters

List of Creating symbols

Troubleshooting

Specifications

Notes on use

Changing the key layout setting

Using the International Keyboard Settings

List of calculator functions

Changing the tab key movement