Installing the Software

When you try to perform wireless LAN communications for the first time after inserting the Wireless LAN card in your CLIÉ handheld, you need to install the Wireless LAN utility in your CLIÉ handheld. You can install the Wireless LAN utility by using the supplied CD- ROM.

Note

Before installation, it is necessary to have Palm Desktop for CLIÉ installed and to perform a HotSync operation. Connect the CLIÉ handheld to a Windows computer, using a cradle, etc. For details on how to connect the CLIÉ handheld to the computer, see the Operating Instructions of your CLIÉ handheld.

1Perform a soft reset on your CLIÉ handheld.

For details on how to perform a soft reset, see the Operating Instructions of your CLIÉ handheld.

2Insert the supplied CD-ROM in the CD-ROM drive of your Windows computer.

The installer starts and the initial screen appears.

Tip

If the installer does not start automatically, double-click [setup] (setup.exe) which can be found in the CD-ROM.

3Proceed with the installation, following the installer’s instructions.

On the user name selection screen, select a user’s name.

Note

If you want to use more than one CLIÉ handheld, you need to install this utility in each CLIÉ handheld.

12