4Click [Done] when the installer-closing screen appears.

Your computer is ready to install the Wireless LAN utility to your CLIÉ handheld. In the next step, you will perform a HotSync operation to carry out the installation.

5Click the icon on the task tray that is located in the lower right corner of the Windows display on your

computer.

Check that [Local USB] is ticked in the shortcut menu on the display.

Tip

If you cannot find the icon on the task tray, click [Programs] ([All Programs] in Windows® XP), [Sony Handheld], and then [HotSync Manager] to start up the HotSync manager, from the [Start] menu.

6Execute a local HotSync operation on your CLIÉ handheld.

The Wireless LAN utility is installed into your CLIÉ handheld.

Note

Part of this software application extends into the system of CLIÉ handheld. Therefore, it cannot be uninstalled.

After you perform a hard reset

Be sure to reinstall this utility.

After a hard reset, normally, the backup data in a personal computer is automatically restored to your CLIÉ handheld through a HotSync operation. However, this utility restores only the setting file when a HotSync operation is performed, and it does not restore the utility itself. Therefore, it is necessary to reinstall this utility after a hard reset.

13