12 Tap V of [ch] below [Adhoc], and select a channel.

Be sure to select the same channel for both your CLIÉ handheld and the other communication device. Select a channel from 1 to 11.

13 Tap [Advanced Setup] in the lower right corner of the screen.

14 Tap the checkbox of [Auto] in [IP Address], and remove the tick.

The IP address input screen appears.

Note

Ad-hoc mode may not be established if “Auto” is checked.

The connection works only when both of the PC without DHCP and CLIÉ handheld select “Auto”. Most of the time, user has to enter static IP on CLIÉ handheld for the Ad-hoc mode.

Continued on next page

27