Sony PEGA-WL100, SU-WL100 manual 33

2Rotate the Jog Dial navigator to select HotSync and press the Jog Dial navigator on the Application Launcher screen.

The [HotSync] screen is displayed.

You can also tap the [HotSync] icon to display the HotSync screen.

3Tap the Menu icon, and tap [Primary PC Setup] from the [Option] menu.

4Check that correct data is entered in [Primary PC Address] and [Subnet Mask(optional)], and tap [OK].

5Tap the Menu icon, and tap [Modem Sync Prefes] from the [Option] menu.

6Tap [Network], and tap [OK].

7When the HotSync screen appears, tap [Modem], and then tap [Select Service].

8Tap V of [Service], select [Wireless LAN], and tap [Done].

Tip

It is unnecessary to enter a telephone number in [Enter phone #].

Note

It is also necessary to select [Wireless LAN] in [Service] on the [Network] screen of the [Preferences] that can be started from the home screen.

Performing a HotSync operation

When you finish the preparation of your CLIÉ handheld and your computer, tap the [HotSync] icon on the [HotSync] screen.

Your CLIÉ handheld automatically connects to the network and begins a HotSync operation.

When communication is not possible

Following the above Step 3, erase the [Primary PC Name].

33