SymptomCause/Remedy

The data transfer rate is • There is an obstacle that could block off

slow.

radio waves (e.g., metal plate, concrete

 

block) between your CLIÉ handheld and

 

the access point.

 

pMove your CLIÉ handheld and/or the

 

access point to a different place.

 

pDisable the power saving mode.

 

(This will increase the power

 

consumption. Be careful of the

 

remaining battery power).

 

• There is a device operating at the 2.4 GHz

 

band of frequencies (microwave oven,

 

Bluetooth-enabled device, etc.) around

 

the CLIÉ handheld.

 

pIncrease the distance between the

 

device and the CLIÉ handheld or turn

 

off the power of the device.

 

 

You forget a WEP

p After changing all the settings of the

(encryption) key.

access point to its factory default setting,

 

set the access point again.

 

To restore the default settings, see the

 

operating instructions of the access point.

 

 

You cannot send or

p Check the settings of the emailing

receive email.

software you are using.

 

For details on how to set the emailing

 

software, see its operating instructions.

 

 

You cannot perform a

p Check the settings of HotSync.

HotSync operation.

For details on how to set HotSync, see the

 

operating instructions supplied with your

 

CLIÉ handheld.

 

 

You cannot browse

p Check the settings of the web browser

homepages.

you are using.

 

For details on how to set the web

 

browser, see its operating instructions.

 

 

Tip

You can view the data of the communication preferences.

While performing communications using your CLIÉ handheld in which this Wireless LAN card is inserted, show the [Network] screen of [Preferences]. Select [Option] on the menu, then select [View Log].

36