English
Replacing the Air Filter
Notes
•When removing the air filter from the projector, take care that no dust or object gets into the inside of the projector.
•Whenever you replace the lamp unit, be sure to replace the air filter with a new one.
The illustrations below show the case when the air filter is replaced with the projector installed on the ceiling.
If you replace the air filter with the projector placed on a table or floor, place a protective sheet (cloth) and turn the projector over so you can see its underside.
1Loosen the three screws on the filter holder to remove the air filter cover and filter holder, then remove the air filter.
Screws
Air filter cover
Filter holder
Air filter
Note
The air filter cover is used only when the projector is installed on a ceiling.
2Insert a new air filter into the projector so that the projection part on the air filter is aligned with a hole on the projector.
Air filter
3Replace the filter holder and air filter cover, then fasten the three screws.