Note
To change the recording side of the tape from the reverse side (9) to the front side ((), press STANDBY to make the
tindication disappear, and press STANDBY again.
Tips
•The preset settings remain until you reset them.
•When you select both sides recording, the recording will stop after the both sides recording finishes so that accidental recording will not be made.
•The display window does not light while the recording timer is on.
6 Set the timer to the hour and the minutes you want to start recording.
1 Press 0/– or )/+ to set the hour and press DISPLAY/ ENTER.
2Press 0/– or )/+ to set the minutes and press DISPLAY/ ENTER.
7 Set the timer to the hour and the minutes you want to stop recording. (Do as step 6.)
8 Press 0/– or )/+ to set the volume you want, and press DISPLAY/ENTER.
9 Press STANDBY.
The power goes off. The tindication and the recording side of the tape (front side (()) appear in the display.
At the preset time, the power will go on and the recording will start. Then the power will go off at the preset time, and the player will enter the standby mode.
To check/change when the recording will start
Press TIMER/CLOCK, then DISPLAY/ENTER. Each time you press DISPLAY/ENTER, a stored setting lights up. Change the setting if you need to when the setting lights up. When you finish checking, press
TIMER/CLOCK.
To listen to the radio, etc. before a
If you turn on the player, you can use it as usual. Before the preset time, tune in the station you want to record and turn off the power.
To stop
Turn off the power.
Timer The
The Timer 25EN