When recording the sound of the component connected to the LINE IN jack, press 0/– or )/+ to display “LINE,” and press DISPLAY/ ENTER.
4 Press 0/– or )/+ until “REC” appears in the display, and press DISPLAY/ENTER.
5 Press 0/– or )/+ until “RADIO” appears in the display, and press DISPLAY/ENTER.

Timer-recording radio programs

You can set timer to record the radio at a

STANDBY

 

certain time. You can also record the

 

sound of the component connected to

 

the LINE IN jack, using the timer. Make

 

sure you have set the clock (see “Setting

TIMER/

the clock” on page 20.)

CLOCK

 

DISPLAY/

 

ENTER

 

0/–,

 

)/+

Note

Before you begin, make sure the t(clock) indication

You cannot preset

is not lit in the display. If it is lit, press STANDBY.

recording timer and

1 Tune in the radio station and insert a cassette for

wake-up timer (page

21) at the same time.

recording.

 

 

2 Press DIR MODE on

 

Tip

Display

the player to select

 

When you receive the

One side

direction of the tape.

MW/LW program in

 

 

Both sides

step 1, press r/Pto

 

check if the noise is

 

 

 

 

heard. If so, press

3 Press TIMER/CLOCK to display the tindication.

PLAY MODE/MONO/

ST/ISS on the player to

Do the following operations by checking the

select the position that

most decreases the

display window.

 

noise.

 

 

 

 

 

24EN The Timer