Waking up to music (continued)
Tips
•The display window does not light while the waking up timer is operating even if the power is on.
•You can have the player go on the next day at the same time. Just press STANDBY until the tindication appears in the display.
The preset settings remain until you reset them.
5 Set the timer to the hour and the minutes you want the music to go on.
1 Press 0/– or )/+ to set the hour and press DISPLAY/ ENTER.
2Press 0/– or )/+ to set the minutes and press DISPLAY/ ENTER.
6 Set the timer to the hour and the minutes you want the music to go off (Do as step 5.)
7 Press 0/– or )/+ to set the volume you want, and press DISPLAY/ENTER.
8 Press STANDBY.
The tindication lights up and the power goes off.
At the preset time, the power will go on and music will fade in. Then, music will fade out and the power will go off at the preset time, and the player will enter the standby mode.
To check/change when the playback will start
Press TIMER/CLOCK, then DISPLAY/ENTER. Each time you press DISPLAY/ENTER, a stored setting lights up. Change the setting if you need to when the setting lights up. When you finish checking, press
TIMER/CLOCK.
To use the player before a timer playback starts
If you turn on the player, you can use it as usual ( in case of the radio, if you listen to the station which is different from the one you tuned in in step 1 on page 21, you will hear that station at the preset time.) Turn off the player before the preset time.
To stop play
Turn off the power.
22EN The Timer