Parts of Function and Location

Rear Panel Descriptions

230V

120V

VOLTAGE

SELECTOR

12 34 56789

1ANALOG (UNBALANCE) input jacks

Inputs as an analog signal the sound of the component connected by a pin type connecting cable.

2ANALOG (UNBALANCE) output jacks

Outputs as an analog signal the contents of the MD of this recorder to the component connected by a pin type connecting cable.

3ANALOG INPUT LEVEL control

Can adjust the level of analog input in a range of _∞ ~ +15 dB.

Normally, this control is used in the position (0 dB) of center click.

4DIGITAL COAXIAL input jack

Inputs as a digital signal the sound of the connected component.

5DIGITAL COAXIAL output jack

Outputs an a digital signal the contents of the MD of the recorder to the connected component.

6DIGITAL OPTICAL input connector

Inputs as a digital signal the sound of the connected component.

7DIGITAL OPTICAL output connector

Outputs an a digital signal the contents of the MD of the recorder to the connected component.

8CONTROL-S jack

Connects the remote or control equipment.

If the plug is connected to the jack, the remote sensor does not receive infrared rays.

9VOLTAGE selector

(Exept for the USA/CA models)

Select 120V or 230V according to the local power line voltage. (Refer to page 2)

8