INTRODUCTION
Installing or Removing the Tilt/Swivel Base
1.Turn off the system and all attached peripherals.
2.Carefully set the monitor upside down.
Remove the Tilt/Swivel Base:
1.Squeeze and hold the latches.
2.Pull the tilt/swivel base to the rear of the monitor and lift to remove the base.
Installing the Tilt/Swivel Base:
1.Align the base with the slots on the bottom of the monitor and insert the tilt/ swivel base into the slots.
2.Push the tilt/swivel base firmly toward the front of the monitor until the latches click into the locked position.
English
InstallRemove
5
¨ ¨ ¨
