LMD-2030W Connector PanelLMD-1420 Connector PanelLMD-1410 Connector Panel
High Picture PerformanceHigh Purity Color Filters
The entry-level one-piece type LUMA monitors come equipped with high-purity RGB color filters, allowing the reproduction of colors with stunning depth and saturation.
Excellent Brightness and Contrast
The entry-level one-piece type LUMA monitors provide high- brightness, high-contrast images.
Wide Viewing AngleThe LCD panels used in the entry-level one-piece type LUMA monitors provide a wide viewing angle of 178 degrees for the LMD-2030W, and 170 degrees for the LMD-1420 and LMD-1410, both horizontally and vertically, with minimal reduction in picture contrast. This allows images to be viewed from various positions and angles.
Operational Convenience
Advanced Marker Settings
The LMD-2030W and LMD-1420 can display various area markers, including a center marker and aspect markers. The brightness of these markers can be selected from three different levels: white, gray, and dark gray. Users can also select either a black or gray matte to fill the outer area of the aspect markers. These flexible marker controls, together with the choice of many different aspect markers, make these monitors extremely convenient display devices for a variety of shooting scenarios.
Marker Variation
Color Temperature
The color temperature can be selected as 'high', 'low', or user preset.
Selectable Scan Size for Video Input and Aspect Ratio
The scan size can be selected between 5% over-scan and -3% underscan modes. The aspect ratio can be switched between 16:9 and 4:3 according to the input signal.
Three-color Tally
The LMD-2030W and LMD-1420 come equipped with a tally lamp that can be lit via a parallel remote connector.
The status of the signal displayed on the monitor can be identified by the tally color - red, green, or amber.
Parallel Remote Control
The entry-level one-piece type LUMA monitors can be controlled remotely via their parallel remote connectors. In the remote menu, there are 17 functions for the LMD-2030W and 25 for the LMD-1420 and LMD-1410 (such as the ability to switch input signals), of which seven can be allocated to the remote connector.
Monaural Audio MonitoringAll entry-level one-piece type LUMA monitors are equipped with a speaker (0.5 W), which enables the user to monitor audio.
Protected Controls
The key-inhibit function helps prevent inadvertent operation from the control panel.
Convenient Installation
Mounting Flexibility
Mountable in a 19-inch EIA Standard Rack (LMD-2030W)All entry-level one-piece type LUMA monitors can be mounted in a 19-inch EIA standard rack using optional mounting brackets. The 9U-high LMD-2030W uses the MB-529 Mounting Brackets, and the 7U-high LMD-1420 and LMD-1410 use the MB-526 Mounting Brackets.
VESA Mounting
Complying with VESA standards, these monitors can easily be mounted (100 x 100 mm pitch) on a wall or ceiling.
Other Features
•Setup Level for Analog Component and NTSC signals
•Blue-Only Mode (LMD-2030W and LMD-1420 only)
•External Sync IN (LMD-2030W and LMD-1420 only)
•4:3 Zoom (LMD-1420 only)