Manuals / Brands / Home Audio / Turntable / Sony / Home Audio / Turntable

Sony PS-LX300USB Playing a Vinyl Record, Operations, When playback is finished, To stop playing, 1 Place a vinyl record on the platter, 5 Close the dust cover, 6 Press START

1 20

Download 20 pages, 700.75 Kb

Set the SIZE SELECTOR to 17 or 30.

Operations

Playing a Vinyl Record

45 r/min adaptor

STOP

UP/DOWN

1 Place a vinyl record on the platter.

Note

Place only one vinyl record on the platter at a time. If two or more vinyl records are stacked on the platter, the stylus will not make proper contact with the grooves and the quality of reproduction will be impaired.

2 Press the Speed select button to select the speed.

3

4 Turn the protective cover to expose the stylus.

5 Close the dust cover.

6 Press START.

The platter starts rotating.

Note

Lower the volume of the amplifier to prevent damage to it. If the tone arm descends and the stylus touches the vinyl record, a loud creaking noise may occur and harm the amplifier or speakers. Adjust the volume of the amplifier after the stylus descends.

7 Adjust the volume on your amplifier.

When playback is finished

The tone arm returns to the arm stand automatically, then the platter stops rotating.

To stop playing

Press the STOP button.

The tone arm returns to the arm stand.

The platter stops rotating.

GB

Contents

3-198-123-14 (1) Owner’s Record © 2008 Sony Corporation WARNING Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Consult the dealer or an experienced radio/TV technician for help CAUTION If you have any questions about this product, you may call: Table of Contents About This Manual Getting Started Unpacking Assembling the Turntable 1 Move the metallic parts inside the larger gear in the direction of the arrow 2 Carefully place the platter on the spindle 3 Using the ribbon, loop the drive belt around the motor pulley To remove the dust cover To install the dust cover Hooking Up the Turntable 3 Connect the AC power cord 1 Set the PHONO/LINE switch (on the rear of the turntable) according to the jacks of your stereo system Playing a Vinyl Record 1 Place a vinyl record on the platter 2 Press the Speed select button to select the speed 4 Turn the protective cover to expose the stylus 5 Close the dust cover To pause playing To play a 17-cmvinyl record Installing the supplied software 1 Insert the supplied CD-ROMinto the CD drive of your computer 2 Install the software according to on- screen instructions Connecting the USB cable Setting your computer Click [Hardware and Sound]. Click [Sound] 1 Select [Settings] from the [Start] menu 6 Select [USB Audio CODEC] for [Microphone] 8 Select [USB Audio CODEC], then click [Properties] 11 Click [OK] Reference guides for the supplied software Additional Information Precautions Maintenance Stylus and record care Replacing the stylus To remove the stylus To install the stylus Troubleshooting Playing a vinyl record USB connection/recording 1Select [Settings] from the [Start] menu 2Select [Control Panel] 3Select [System and Maintenance] 4Select [Device Manager] The recorded sound is disrupted Specifications Parts and Controls Spindle 45 r/min adaptor Speed select button Rubber mat