Network

Adjusting network settings

Creating a new network connection

You can adjust network settings to connect to an access point and save the network connection data on the system. Network settings may vary depending on the equipment in use and the network environment. The following instructions are based on the most common network configuration and may not apply to all installations.

1Select (Network Settings) under

(Settings) from the Home Menu, and then press the button.

2Select "Infrastructure Mode", and then press the button.

3Select "New Connection", and then press the button.

4Select "Scan", and then press the right button.

When using a wireless access point that supports AOSS™, select "Automatic", and then follow the on-screen instructions. The setup will complete automatically. For information on access points that support automatic setup, contact the access point manufacturer.

AOSS™

Buffalo, Inc.

DE

IT

NL

PT

21