Sony RDR-GX355 Notes, Command Mode, Front Display, Factory Setting

2Select “Rating Level,” and press ENTER. The selection items for “Rating Level” are displayed.

Parental		10:10 AM
Title List	Rating Level	: LevelOff 1 (Kids)
Timer	Change Password	Level 8 (Adults)
Edit		Level 7
		Level 6
DV/D8 Dubbing		Level 5
Disc Setting		Level 4
		Level 3
Setup		Level 2

The lower the value, the stricter the limitation.

3Select the level, and press ENTER. The Parental setting is complete.

•To cancel the Parental setting for the disc, set “Rating Level” to “Off” in step 3.

•To change the password, select “Change Password” in step 2, and press ENTER. When the display for registering a password appears, enter a new four-digit password using the number buttons.

zHint

If you enter a wrong number, press < or CLEAR and re- enter.

Notes

•If you forget your password, select “Factory Setting” of “Options” in the “Setup” display.

•Playback of discs without the Parental Control function cannot be limited on this recorder.

•Depending on the disc, you may be asked to change the Parental Control level while playing the disc. In this case, enter your password, then change the level.

Front Display

Adjusts the lighting of the front panel display.

Auto	Adjusts to low lighting when
	power is off.
Bright	Maintains bright lighting
	when power is off.
Dimmer	Maintains low lighting
	regardless of whether power
	is on or off.
Off	Turns off the lighting when
	power is off. Maintains the
	lighting when power is on.

Command Mode

Changes the command mode of this recorder if other DVD equipment is assigned the same command mode. Be sure to match the command mode of the supplied remote to the setting made here. For details, see “If you have a Sony DVD player or more than one Sony DVD recorder” on page 22.

DVD 1	Select this if the default
	command mode conflicts
	with other DVD equipment.
DVD 2	Select this if the default
	command mode conflicts
	with other DVD equipment.
DVD 3	The default command mode
	of the recorder.

Factory Setting

Allows you to return the setup settings to their default settings. Note that all of your previous settings will be lost.

1After step 3 on page 83, select “Factory Setting,” and press ENTER.

2Select “Start,” and press ENTER.

The setup settings return to their default settings.

3Press ENTER when “Finish” appears.

The power automatically turns off and then on again, and the recorder is reset to the factory settings.

When the “Easy Setup” display appears, follow the instructions for Easy Setup (page 23) from step 4.

84