If the timer settings of a Synchro- Recording and another timer recording overlap
Regardless of whether or not the programme is a Synchro Rec programme, the programme that starts first has priority and the second programme starts recording only after the first programme has finished.
First programme
Second programme
will be cut off
5 Insert the source tape into the connected equipment and set to playback pause.
6 Press z REC.
This recorder starts recording.
7 Press the pause (or play) button on the connected equipment to cancel the playback pause status.
The connected equipment starts playback and the playback image is recorded by this recorder.
To stop recording, press x REC STOP on this recorder.
Recording from connected equipment without a timer
You can record from a connected VCR or similar device. To connect a VCR or similar device, see “Connecting a VCR or Similar Device” on page 20. Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack).
1 Insert a recordable DVD.
See “1. Inserting a Disc” on page 23.
2 Press INPUT SELECT to select an input source according to the connection you made.
The front panel display changes as follows:
programme position
3 Select the desired audio signal when recording a bilingual programme to the
Press OPTIONS to select “Line Audio Input,” and press ENTER. Then select “Bilingual,” and press ENTER.
4 Press REC MODE repeatedly to select the recording mode.
For details about the recording mode, see page 42.
If you connect a digital video camera with a DV IN jack
See “DV Dubbing” on page 72 for an explanation of how to record from the DV IN jack.
zHint
You can adjust the settings for the recording picture before recording. See “Adjusting the recording picture quality and size” on page 48.
bNotes
•When recording a video game image, the screen may not be clear.
•Any programme that contains a
54