Step 7: Easy Setup
Follow the steps below to make the minimum number of basic adjustments for using the recorder. If you do not complete Easy Setup, it will appear each time you turn on your recorder. Settings are made in the following order.
OSD Language Setup
m
Clock Setup
m
Cable Box/Sat. Control Setup
m
Tuner and Channel Setup
m
TV Type Setup
m
Audio Connection Setup
m
Finished!
"/1
Number buttons
M/m/</,,
ENTER
O RETURN 
1 | Turn on the TV. |
|
2 | Press "/1. |
|
3 | The recorder turns on. |
|
Switch the input selector on your TV so that |
| |
| the signal from the recorder appears on |
|
|
| |
| your TV screen. | Hookups |
| recorder will be made. You can change them | |
| “Initial setting necessary to operate the DVD |
|
| later using setup.” appears. | and |
|
| |
| • If this message does not appear, select “Easy | Settings |
| Setup” in the “Setup” display to run Easy | |
|
| |
4 | Setup (page 108). |
|
Press ENTER. |
|
The setup display for selecting the language used in the
No Disc Easy Setup
Select the screen language.
English
Français
Español
5 Select a language, and press ENTER.
The setup display for clock setting appears.
No Disc Easy Setup
Select a method for setting the clock.
If you select "Auto", this recorder will look
for a time signal when you turn it off.
Auto
Manual
6 Select “Manual,” and press ENTER.
Press M/m to set the month and press ,. Set the day, year, hour, minutes, and AM/PM in the same way, then press ENTER. The day of the week is set automatically.
•If you used antenna hookup C (page 15), you can select “Auto.” The recorder will automatically search for a channel that carries a time signal when you turn off the recorder after finishing Easy Setup.
The setup display for cable box/satellite receiver control appears.
,continued 23