Point the recorder’s remote at the recorder (not at the cable box/satellite receiver).
Press CH +/– and check that the channel changes on the cable box/satellite receiver window.

“4:3 Letter Box”: For standard TVs. Displays “wide screen” pictures with bands on the upper and lower sections of the screen. “4:3 Pan Scan”: For standard TVs. Automatically displays “wide screen” pictures on the entire screen and cuts off the sections that do not fit.

“16:9”: For wide-screen TVs or standard TVs with a wide screen mode.

For details, see “Video Settings (Video)” on page 100.

14 Press ENTER.

The setup display for selecting the type of Dolby Digital signal appears.

No Disc Easy Setup

10:10 AM

Dolby Digital

D-PCM

Dolby Digital

18 Press ENTER when “Finish” appears.

Easy Setup is finished. All connections and setup operations are complete.

If you use the cable box/satellite receiver control, check that the control works correctly (page 25).

No Disc Easy Setup

10:10 AM

Hookups

 

 

 

Easy Setup is finished.

 

and

 

 

Finish

 

Settings

To return to the previous display

Press O RETURN.

zHint

If you want to run Easy Setup again, select “Easy Setup” in the “Setup” display (page 108).

15 Select the type of Dolby Digital signal you want to send to your amplifier (receiver).

If your AV amplifier (receiver) has a Dolby Digital decoder, select “Dolby Digital.” Otherwise, select “D-PCM.”

16 Press ENTER.

The setup display for selecting the type of DTS signal appears.

No Disc Easy Setup

10:10 AM

DTS

On

Off

17 Select whether or not you want to send a DTS signal to your amplifier (receiver), and press ENTER.

If your AV amplifier (receiver) has a DTS decoder, select “On.” Otherwise, select “Off.”

Note

To record TV programs using the timer, you must set the clock accurately.

Checking the cable box/satellite receiver control setting

1 Turn on the recorder and the cable box/ satellite receiver.

2

3

4 Press the number buttons and check that the channel changes on the cable box/ satellite receiver window.

If you cannot get the recorder to control your cable box/satellite receiver

Check the settings at “Set Top Box Control” in “Features” setup (page 105).

Check the connection and place the set top box controller near the cable box/satellite receiver (page 12).

,continued 25