Using optional audio components
1Connect additional audio
component to the AUDIO IN jack on the unit using an audio analog cord (not supplied).
2Turn down the volume.
Press VOLUME – (or turn the VOLUME control on the unit towards
3Select the AUDIO IN function.
Press AUDIO IN on the unit.
4Start playing the connected component.
5Adjust the volume.
Press VOLUME +/– (or turn the VOLUME control on the unit) .
Adjusting the sound
To add a sound effect
To | Press |
Reinforce the | GROOVE on the unit |
bass and create | repeatedly until “GROOVE” |
a more powerful | appears. |
sound |
|
Set the surround | SURROUND on the unit |
effect | repeatedly until “SURR” |
| appears. |
Select the preset | EQ repeatedly. To |
sound effect | cancel, press EQ |
| repeatedly until “EQ OFF” |
| appears. |
To turn on the subwoofer
Press SUBWOOFER on the unit repeatedly until “SUB ON” appears. The SUBWOOFER indicator on the unit lights up. If you later disconnect the subwoofer, repeat the procedure until “SUB OFF” appears. The volume of the subwoofer is linked to the front speakers.
14GB