Integrated Remote Commander
RM-AX5000
Operating Instructions

Quick Start Guide

Owner’s Record

The model number is located on the rear of the unit and the serial number is located in the battery compartment.

Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.

Model number : RM-AX5000

Serial number :

http://esupport.sony.com/US/RMAX5000/ © 2008 Sony Corporation Printed in Malaysia

1 Install “RM-AX5000 Custom Setup Tool” to your Windows PC.

Complete the installation by following the on-screen instructions.

 

Start “RM-AX5000 Custom

Sync the Remote Commander with this Wizard setting.

 

Setup Tool and register a

 

 

 

 

 

 

 

 

 

3 Component.”

 

 

 

 

 

“RM-AX5000 Custom Setup Tool”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Contents

• Remote Commander

• Rear Cover

• Battery Charging

“RM-AX5000”

 

Stand “BCA-RMAX5K”

Ni-MH Rechargeable

• AC Power Adaptor

• USB Cable

Battery Pack

 

 

 

 

CD-ROM

 

 

• Quick Start Guide

 

 

• Warranty Card

Installing the battery

 

Insert the connector with the Ni-MH

 

Rechargeable Battery Pack into the

 

Remote Commander.

 

Be sure to match the direction of the

 

connector.

 

Attach and slide the Rear Cover.

 

Be sure to match the direction of the Rear

OPEN

Cover. Align the bottom of the Rear Cover

 

to the Attaching line.

Attaching line

OPEN

2 Connect the Remote Commander to your PC.

Start

Set up your Component by following the simple on-screen instructions. Below are the main steps you will go through to set up your Remote Commander.

Select “First Setup Wizard.”Specify the Model number in the “Configure” window.

4 Disconnect the Remote Commander.

5

 

 

Let’s try using the Remote

 

Commander!

(e.g.) To operate a TV which has just been set up.Press the “POWER” button to turn the TV on.Press the Label button “TV.”Press the “OTHER” button.
Charging the battery
DC IN 6 V jackCHARGE indicator

OPEN

AC Power Adaptor plug

Connect the AC Power Adaptor plug directly to the DC IN 6 V jack on the Remote Commander. Then connect the AC Power Adaptor to a wall outlet.

Charging starts when the CHARGE indicator in the top of the display is lit.

to your PCUSB Cable

CHARGE

OPEN

AC Adaptor
Press the Label buttons or Hardware buttons for desired operations.

Charging is completed when the CHARGE indicator turns off. Disconnect the AC Power adaptor. Then slide to close the Rear Cover.

(to a wall outlet)