Convenient Features

The RM-AX5000 is a full-featured Universal Remote Commander that easily consolidates all of your remote controls into one, providing full

Control Panel reference

The Control Panel shows the following items.

On-PC Setup and On-Remote Setup

There are two ways to make setups for the Remote Commander: “On-PC Setup” with PC software and “On-Remote Setup” directly on the Remote Commander.

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

You are cautioned that any changes or modifications not expressly approved in this manual could

control of up to 18 different Components, including audio, video, and home theater. The following are its main features.

Control up to 18 Components

With the Remote Commander, you can control up to 18 Components, including your TV, DVD Player, Cable Set Top Box, Satellite Receiver, DVR, VCR, CD Player, Receiver, etc.

Centralized control of Sony A/V Components with one Remote Commander

The Remote Commander is preset at the factory to operate Sony brand Components, so you can use it out of the box as a control center for your Sony A/V Components.

On-PC Setup

On-Remote Setup

On-PC Setup (Recommended)

“On-PC Setup” uses the supplied software “RM- AX5000 Custom Setup Tool” to set up the Remote Commander. It allows you to easily make all the necessary setups for the Remote Commander (Component Preset codes, etc.,). Furthermore, you can add and customize a range of setups which are not available with On-Remote Setup.

On-Remote Setup

“On-Remote Setup” is a way of setting up directly on the Remote Commander. You can use it immediately after presetting your Component. However, some advanced setups are not available with On-Remote setup (see the Operating Instructions).

void your authority to operate this equipment.

INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

Remote control signals for non-Sony Components are also included
Title bar

Programmable items of On-PC Setup and On-Remote Setup
Setup items
On-PC Setup On-Remote Setup

If you have any questions about this product, you may call; Sony Electronics Support 1-866-922-7669 or http://esupport.sony.com/US/RMAX5000/

The Remote Commander also recognizes the Preset codes for most major brand Components, not only Sony. Just select the corresponding codes to control all of your A/V Components.

XPRESS functions for executing macros to operate several A/V Components by just one button

Groups of commands from different Components can be set for up to 12 XPRESS functions. For example, when you watch a movie on a DVD player using a TV and Receiver/Amplifier, you can turn on all Components by the press of a single button, even selecting the necessary inputs at the same time, automatically. Available buttons for the XPRESS functions appear on the display.

Also, XPRESS functions can memorize the power on/off and input status of each Component, and send a corresponding signal all with a single

Displays the current Custom Setup name as “(Custom Setup name) RM- AX5000 Custom Setup Tool.”

Menu bar
Displays the RM-AX5000 Custom Setup Tool menu.
[Add New Component] button
Opens the dialog box for adding new Components.
Component/XPRESS function image area

Displays the information connected to the Component or XPRESS function registered to the Custom Setup Tool.

[Set Up] button

Jumps to the display that is to customize the Component or XPRESS function of the selected area.

Setting the Preset codesEditable

Editable

 

 

 

Learning the remote control signals

Editable

Editable

 

 

 

Customizing the Label of the display

Editable

Non-editable

 

 

 

Customizing the Wallpaper of the display

Editable

Non-editable

 

 

 

Customizing the Button Illumination color

Editable

Non-editable

 

 

 

Switching the Timer ON or OFF

Editable

Editable

 

 

 

Programming the Timer

Editable

Non-editable

 

 

 

Programming the macro

Editable

Non-editable

 

 

 

Hardware Settings

Editable

Editable

Hint

Components or learned data done on On-Remote Setup can be imported to your

Declaration of Conformity

Trade Name:

SONY

Model number:

RM-AX5000

Responsible Party:

Sony Electronics Inc.

Address:

16530 Via Esprillo, San

 

Diego, CA 92127 USA

Telephone number:

858-942-2230

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RECYCLING NICKEL METAL HYDRIDE BATTERIES

Nickel Metal Hydride batteries are recyclable. You can help preserve our environment by returning

your used rechargeable batteries to the collection

and recycling location nearest you.

For more information regarding recycling of rechargeable batteries, call toll free 1- 800-822-8837, or visit http://www.rbrc.org/

Caution:

Do not handle damaged or leaking Nickel Metal Hydride batteries.

button press.Clock display and Timer functionLearning function lets you program other remote control signals you may needSystem Control function executes a macro by pressing one button

Selecting a desired Component

Label buttons
Hardware buttons
OTHER button
There are two different ways to select a component.
To select with the Label button

Press the [OTHER] button to display the registered Components, then press the desired Label button.

To select with the Hardware button
Press one of the desired Hardware button directories.
(Delete) button
Deletes the Component or XPRESS function in the selected area.
(Minimize) button

Minimizes the RM-AX5000 Custom Setup Tool window and shows an icon on the Windows taskbar.

(Close) button
Exits RM-AX5000 Custom Setup Tool.
Connection status
Displays the connection status between your PC and the Remote Commander.
[HELP] button Displays the HELP window.
[Sync Remote Commander] button

Transfers the Custom Setup you made in the RM-AX5000 Custom Setup Tool to the Remote Commander.

[Customize Component Menu] button

Jumps to “Customize Component Menu” window. Then you can customize the display of the Component Menu.

[Hardware Settings] button

Jumps to “Hardware Settings” window. Then you can customize the settings of the Remote Commander.

[System Control] button

Jumps to “System Control Settings” window. Select a button on the Remote Commander of the setting display so as to set the Action with the Set Up Actions button.

[Timer Actions] button

Jumps to “Timer Action Settings” window. Then you can program the Remote Commander to automatically perform a customized series of actions at a designated time.

[Page1/Page2] button

Switches the display between Page 1 and Page 2 when the total number of the Component and XPRESS functions in Page 1 is more than 15.

PC. However, the data setup with On-PC Setup cannot be changed with On-Remote Setup.

On-Remote SetupFor details, refer to the Operating Instructions (PDF file).

Macro Setups

A “Macro” is a series of multiple commands or actions that are performed in order. By programming macros into the Remote Commander, you can operate your Components easily through one-button control.

There are two primary types of macros for the Remote Commander: XPRESS functions for specific A/V playback and System Control functions for total home theater and A/V control.

XPRESS function

An XPRESS function is an executed series of consecutive actions that can operate several A/V Components by pressing just one button.

Also, the XPRESS function can memorize the status of power on/off, input select of each Component, and it sends a signal corresponding to their status, therefore, all you have to do is simply press your XPRESS button once.

System Control

A System Control function is an executed series of actions that operate several A/V Components by pressing just one button.

For details, refer to the Help file of “RM-AX5000 Custom Setup Tool.”

Using a Battery Charging Stand

Connect the AC Power Adaptor plug to the DCIN 6 V jack on the rear of the Battery ChargingStand.

After matching the Remote Commander terminal and the Battery Charging Stand terminal, place the Remote Commander on the Battery Charging Stand.

Notice for users
On the supplied software

•Copyright laws prohibit reproducing the software or the manual accompanying it in whole or in part, or renting the software without the permission of the copyright holder.

•In no event will SONY be liable for any financial damage, or loss of profits, including claims made by third parties, arising out of the use of the software supplied with this unit.

•In the event a problem occurs with this software as a result of defective manufacturing, SONY will replace it.

However, SONY bears no other responsibility.

•The software provided with this unit cannot be used with equipment other than that which is so designated.

•Please note that, due to continued efforts to improve quality, the software specifications may be changed without notice.

•Operation of this unit with software other than that provided is not covered by the warranty.

On copyrights

•Microsoft, Windows and Windows Vista are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

•All other trademarks and registered trademarks are trademarks or registered trademarks of their respective holders. In this manual, ™ and ® marks are not specified.

Program © 2008 Sony Corporation

Documentation © 2008 Sony Corporation

Disposing of the battery

For environmental conservation, be sure to remove the rechargeable battery from the unit before you dispose of the product, and dispose of the battery appropriately.

Detach the Rear Cover according to the following procedure, then remove the battery.

Slide and open the Rear CoverRemove the rear cover while
until it stops.

pressing the tab, then remove the

 

connector.