wa Cursor buttons (U/u/I/i), ENTER/ EXEC button

After pressing the MAIN MENU, AV MENU, or TITLE/GUIDE button, use the cursor buttons to make specific settings, then press the ENTER/EXEC button to enter the selection.

ws TITLE/GUIDE button*

Press to display DVD titles or guide menus.

wd AV DISPLAY button

Press to select the information displayed on the TV screen.

wf Operation buttons*

The following table describes the component operated by each button and the function of the buttons. See the table on page 10 for information on the buttons that you can use to control each component.

Button(s) Function

./> Skips tracks.

m/M Fast forwards or rewinds.

Searches tracks in the forward or backward direction.

nStarts play on the reverse side of the cassette.

NStarts play. (Starts play on the front side of the cassette.)

XPauses play or recording or starts recording when the component is in recording standby.

xStops play.

wg SHIFT / >10 button*

If you selected tuner:

Press repeatedly to select a memory page for presetting radio stations or tuning to preset stations.

If you selected VCR, TV, LD player, tape deck, MD deck, or CD player:

Press before inputting a channel or track number of eleven or higher.

wh CLEAR / -/-- / D.TUNING button*

If you selected DVD player:

Press if you made a mistake when you press the numeric buttons.

If you selected TV or VCR:

Press to select the channel entry mode, either one or two digit.

wj SEARCH MODE button

Press to select the search mode of DVD player.

wk Indicator*

Lights up whenever any button on the remote is pressed.

wl USE MODE button

Use to program the remote.

*The function of these buttons switch automatically each time you press the function buttons (1). The above explanation is intended to serve as an example only. Therefore, depending on the component, the above operation may not be possible or may operate differently than described.

continued

Operations Remote Basic and Parts of Location

7