Additional Information
Troubleshooting
If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer.
The remote does not function.
•Check the mode of the remote (page 15).
•Point the remote at the remote sensor 
on the receiver.
•Remove any obstacles in the path between the remote and the receiver.
•Replace both batteries in the remote with new ones, if they are weak.
•Make sure you select the correct function on the remote.
Specifications
General
Remote control system
Infrared control
Power requirements | 3 V DC with two R6 |
| |
Dimensions | 210 x 68 x 25 mm |
Mass (approx.) | 120 g excluding batteries |
Design and specifications are subject to change without notice.
Sony Corporation Printed in Malaysia