Sony SA-NS300 4, 6, 5, Specifications

Others

4Put a check the checkbox

beside [UPnP User Interface],

then click [OK].

5Click [Next].

The [Completing the Windows

Components Wizard] window appears.

6Click [Finish].

Specifications

AUDIO POWER

SPECIFICATIONS

POWER OUTPUT AND TOTAL

HARMONIC DISTORTION:

With 4 ohm loads,driven from 100 - 20 kHz;

rated 1.5w atts minimum RMS power,with no

more than 1% total harmonic distortion from

100milliwatts to rated output.

Wireless LAN section

Compatible standards:

IEEE 802.11 b/g

(WEP 64 bit, WEP 128 bit,

WPA/WPA2-PSK (AES),

WPA/WPA2-PSK (TKIP))

Radio frequency:

2.4GHz

Inputs/Outputs

Speakers

Approx. 50mm (2 in) diameter × 1

AUDIO IN jack:

Stereo mini jack

Voltage: 1.0 V

Network port:

10BASE-T/100BASE-T (Auto Polarity)

General

Power requirements:

AC adaptor

Input: 100-240V AC, 50/60Hz

Output: DC5.2V 2A

Dimensions (w/h/d) (including

projecting parts and controls):

Approx. 141 × 141 × 123 mm

(Approx. 55/8 × 55/8 × 47/8 in)

Contents

Main Network Speaker Operating Instructions 2 To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. CAUTION WARNING For customers in the United States and Canada Owners Record For customers in the United States Important Safety Instructions CAUTION For the State of California, USA only For customers in Europe Notice for the customers in France Notice for the customers in Italy Notice for the customers in Norway Table of Contents Getting Started Network Connections Listening to Audio Content Over Your Home Network Enjoying Sony Multiple-Room Products Features of this unit Product Overview 1: Setting up your home network Wireless networks WPS* compliant wireless networks Wired networks Guide to Parts and Controls Front Getting Started Main unit Rear Page Remote control Checking the Supplied Accessories Preparing the remote control Preparing the Unit and the Remote 1 2 3 Turning the Unit On or Off Slide the power switch to ON To set the network standby mode To resume power from the network standby mode To turn the unit off How to Connect Your Network Wireless Network: WPS Compliant Wireless Network: Wired network: When a problem occurs while you are making the network settings 5 6 7 8 9 10 Setting Up Wireless Networks Using an Access Point Compliant with WPS 1 (LAN) cable is disconnected. 2 3 access point. 1 2 3 4 5 6 8 9 Option 5: Fixed IP method 10 Setting Up Wired Networks 3 4 5 6 7 8 Using DLNA (Digital Living Network Alliance) Setting up a computer with Windows 7 1 Listening to Audio Content Over Your Home Network Listening to audio content on a computer with Windows 7 Listening to audio content stored on a computer with Windows 7 4 5 Setting up a computer with Windows Vista/ Windows XP 1 Listening to audio content on a computer with Windows Vista/ Windows XP 6 7 8 9 Playing Back Audio Content on a Server at Random 1 select home network input. 2 Listening to audio content on a server Using the Bookmark Function 1 2 the remote when you play back the desired audio content. Deleting from the bookmark list 1 2 Using the PARTY STREAMING Function 1 devices are turned on and are in a status which allows them to join a PARTY. Joining a PARTY Connecting the Unit with DLNA-compliant Devices Enjoying audio content on a server using a controller Setting Screen on the Browser System requirements for the computer Device Details screen Network Settings screen Using the setting screen on the browser 1 2 3 Starting the browser with Windows XP 4 beside [UPnP User Interface], then click [OK]. 6 5 Specifications Precautions On safety On operation On placement On cleaning Glossary xAccess Point (AP) xDHCP xDLNA xDNS xNetwork key (security key) xProxy xRouter xSSID xWEP Troubleshooting Troubleshooting Power 1 listed in this Troubleshooting section. 2 Sound output Network Browser Home Network BOOKMARKS Random play function During a PARTY Using this unit as a PARTY host PARTY STREAMING function Page Trademarks, etc. WPA Supplicant