Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohm loads both channels driven, from 20 - 150 Hz; rated 50 watts per channel minimum RMS power, with no more than 0.8% total harmonic distortion from
250 milliwatts to rated output.
SS-V230 Front and rear speakers
Speaker system | Full range, magnetically |
| shielded |
Speaker units | 5 ⋅ 9 cm (2 ⋅ 3 5/8 in.), |
| cone type |
Enclosure type | Bass reflex |
Rated impedance | 8 ohms |
Power handling capacity |
|
Maximum input power: | 100 watts |
Sensitivity level | 86 dB (1 W, 1 m) |
Frequency range | 90 Hz - 20,000 Hz |
Dimensions (w/h/d) | Approx. 70 ⋅ 151 ⋅ |
| 126 mm (2 7/8 ⋅ 6 ⋅ 5 in.), |
| including front grille |
Mass | Approx. 550 g (1 lb 3 oz) |
| each |
SS-CN230 Center speaker
Speaker system | Full range ⋅ 2, |
| magnetically shielded |
Speaker units | 5 ⋅ 9 cm (2 ⋅ 3 5/8 in.), |
| cone type |
Enclosure type | Bass reflex |
Rated impedance | 8 ohms |
Power handling capacity |
|
Maximum input power: | 120 watts |
Sensitivity level | 88 dB (1 W, 1 m) |
Frequency range | 90 Hz - 20,000 Hz |
Dimensions (w/h/d) | Approx. 301 ⋅ 70 ⋅ |
| 126 mm (11 7/8 ⋅ 2 7/8 ⋅ |
| 5 in.), including front |
| grille |
Mass | Approx. 1.1 kg (2 lb 7 oz) |
SA-WMS230 Subwoofer
System |
|
Speaker system | Active subwoofer, |
| magnetically shielded |
Speaker unit | Woofer: 16 cm (6 3/8 in.), |
| cone type |
Enclosure type | Advanced SAW type |
Continuous RMS power output (8 ohms, 20 - 150 Hz, 0.8 % THD)
50 W
Reproduction frequency range
| 28 Hz - 200 Hz |
High frequency | |
| 200 Hz |
Input |
|
LINE IN (input pin jack) |
|
General |
|
Power requirements | 120 V AC, 60 Hz |
Power consumptions | 45 W |
Dimensions (w/h/d) | Approx. 205 ⋅ 385 ⋅ |
| 385 mm (8 1/8 ⋅ 15 1/4 ⋅ |
| 15 1/4 in.), including |
| front grille |
Mass | Approx. 10.5 kg |
| (23 lb 2 oz) |
Supplied accessories
Foot pads (20)
Audio connecting cords (2 phono to 2 phono) (3) Monaural connecting cord (1 phono to 1 phono)
(1)
Speaker connecting cords, 10 m (32 ft 9 3/4 in.) (2)
Speaker connecting cords, 2.5 m (8 ft 2 1/2 in.) (3)
Design and specifications are subject to change without notice.
10