— Auto power on/off function

Positioning the speakers (continued)

Setting up other

speakers

For greater flexibility in the positioning of the speakers, use the optional WS-FV10, WS-TV10, or WS-WV10 speaker stand (available only in certain countries).

WS-FV10

WS-TV10

WS-WV10

 

 

(for rear

 

 

speakers)

SA-VE505/VE502 only

You can attach the supplied foot pads to the bottom of the speakers, one in each corner.

SA-VE305/VE302 only

You can hang or install the front (and rear) speakers on a wall using hooks or nuts (commercially available).

Hook 60 mm

Nuts (M5)

Note

You are responsible for the proper selection and use of mounting hardware that you purchase at a hardware store, and for the proper and safe mounting of the speakers.

Tip (for SA-VE505/VE305)

The height of the front speakers should be adjusted to about the center of the TV screen.

Listening to the sound

SA-VE505/VE502 SA-VE305/VE302

ON/STANDBY

POWER

U

! indicator ! ! indicator !

First, turn down the volume on the amplifier. The volume should be set to minimum before you begin playing the program source.

1 Turn on the amplifier and select the program source.

2 Press ! on the subwoofer.

The ! indicator on the subwoofer lights up green.

3 Play the program source.

Power turns on and off automatically (SA-VE505/VE502 only)

When the subwoofer is on (i.e, the

!indicator lights up green) and there is no signal input for a few minutes, the

!indicator changes to red and the subwoofer enters power saving mode. While in this mode a signal is input to the subwoofer, the subwoofer automatically turns on (auto power on/off function).

To turn this feature off, slide the POWER SAVE switch on the rear panel to OFF.

POWER

SAVE

AUTO

OFF

Note

If you turn down the volume level of the subwoofer too low, the auto power on/off function may activate, causing the subwoofer to enter power saving mode.

8