Sony SA-VE302, SA-VE305, SA-VE502, SA-VE505 Hooking up the system (continued), OUT, Tip, FRONT, Notes, SPEAKER, SPEAKER, Terminal connections, Hookup C (for SA-VE502/VE302)

Hooking up the system (continued)

Hookup C (for SA-VE502/VE302)

This configuration is used when the amplifier is connected to a CD player, MD deck, cassette deck, or other audio devices.

Front (Right)				Front (Left)
Ee				Ee
			Subwoofer
			L	L
				e
				E
Amplifier				E
	FRONT			e
			R	R
	R		L
		eEEe	SPEAKER	SPEAKER
			IN	OUT
Terminal connections
e		E e
e
E			e
E
			E

Notes

•Make sure the plus (+) and the minus (–) terminals on the speakers are matched to the corresponding the plus

(+) and the minus (–) terminals on the amplifier.

•Be sure to tighten the screws of the speaker terminals securely since loose screws may become a source of noise.

•Make sure all connections are firm. Contact between bear speaker wires at the speaker terminals may cause a short-circuit.

•Do not connect the subwoofer to the amplifier’s CENTER output terminal (which is for Dolby Pro Logic or Dolby Digital (AC-3)). No bass will output from the subwoofer if you do.

•For details regarding the connections on the amplifier side, refer to the manual that was provided with your amplifier.

Tip

It is convenient to remember that all striped wires are minus (–) in polarity and should be connected to the minus (–) speaker terminals.

6