Hooking up the system (continued)

Hookup C (For the 2.1 channel — SA-VE702 only)

This configuration is used when the amplifier is connected to a CD player, MD deck, cassette deck, or other audio devices.

For customers who have purchased the optional SS-V703, see “Hookup A” or “Hookup B.”

Front (Right)Front (Left)

Ee

 

 

Ee

 

 

Subwoofer

 

 

L

L

 

 

 

e

 

 

 

E

Amplifier

 

 

E

FRONT

 

e

 

R

R

 

 

 

R

L

 

 

eEEe

SPEAKER

SPEAKER

 

 

IN

OUT

Attach the front speakers to the supplied speaker stands for positioning. For details, see “Positioning the front (and rear) speakers” on page 7.

Terminal connections

loosen

e

E e

e

 

 

 

E

e

E

 

 

 

tighten

 

E

 

 

Notes

•Make sure the plus (+) and the minus (–) terminals on the speakers are matched to the corresponding the plus

(+) and the minus (–) terminals on the amplifier.

•Be sure to tighten the screws of the speaker terminals securely since loose screws may become a source of noise.

•Make sure all connections are firm. Contact between bare speaker wires at the speaker terminals may cause a short-circuit.

•Do not connect the subwoofer to the amplifier’s CENTER output terminal (which is for Dolby Pro Logic or Dolby Digital). No bass will output from the subwoofer if you do.

•For details regarding the connections on the amplifier side, refer to the manual that was provided with your amplifier.

Tip

It is convenient to remember that all striped wires are minus (–) in polarity and should be connected to the minus (–) speaker terminals.

6GB