Basic Operations

Listening to the Sound

Note

Never set the amplifier’s tone control (BASS, TREBLE, etc.) or the equalizer output to a high level or input sinewaves of 20 Hz to 50 Hz recorded on a commercially- available test disc or special sound (bass sound of electronic musical instrument, pop noise of analog disc turntable, sound with abnormally enhanced bass, etc.) in a high level to this unit. These actions may cause damage to the speakers.

When a special disc containing abnormally enhanced bass is played, noise may be output in addition to the original sound. In such a case, decrease the sound level.

Note

The sub woofer output signal (DOLBY digital (AC-3) signal) of the digital surround processor sold singularly is set 10 dB higher by Dolby laboratories Licensing Corporation. In the case of using normally, adjust the sub woofer level.

8EN

POWER

LEVEL

CUT OFF FREQ

PHASE

U

MIN

MAX

50Hz

200Hz

øNORMAL

 

 

 

 

ØREVERSE

POWER LEVEL

1

Turn on the amplifier and select the program source.

 

 

 

2

Press POWER.

 

 

The woofer turns on and the POWER indicator lights up in green.

 

 

 

3

Play the program source.

 

 

Adjust the VOLUME so that sound from front speakers is not

 

 

distorted.

 

 

If it is distorted, the sound from the woofer will also be distorted.

 

 

 

To turn off the power
Press POWER to release the switch.

If you hear noise when you turn off the woofer, turn down the LEVEL of the woofer, or turn off the amplifier before turning off the woofer.