Sony SA-WX90 Connecting to an amplifier with double (A + B) sets of speaker terminals, Connecting to an amplifier with a single set of speaker terminals, Note, Front, Front

Getting Started

Connecting to an amplifier with a single set of speaker terminals

If your amplifier is equipped with a single set of speaker terminals, connect the woofer to the amplifier, and then connect the front speakers to the woofer.

What cords will I need?

Speaker cord (supplied) (1 for each speaker)

Twist the stripped ends of the cord about 15 mm. Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –. If the cords are reversed, the sound will be distorted and will lack bass. It is useful to decide that the speaker cord marked with a line is always the negative (–) and should be connected to the negative (–) terminal to avoid any improper connections.

Hookups1Connect the woofer to the amplifier.

Connect the SPEAKER IN terminals of the woofer to the amplifier’s speaker terminals with the speaker cords. Be sure to connect both L and R channels.

l: signal flow

Amplifier

SPEAKER

INOUT

This woofer

2Connect the front speakers to the woofer. Connect the speakers to the speaker terminals of the woofer.

This woofer

SPEAKER

INOUT

L	L
Front	Front
Speaker (R)	Speaker (L)
R	R

6GB

Connecting to an amplifier with double (A + B) sets of speaker terminals

If your amplifier has double (A + B) sets of speaker terminals, connect both the woofer and the front speakers to the amplifier.

What cords will I need?

Speaker cord (supplied) (1 for each speaker)

Twist the stripped ends of the cord about 15 mm.

Hookups

1Connect the front speakers to the amplifier. Connect the speakers to your amplifier’s speaker terminals (A).

	Amplifier
	SPEAKER A
Front	Front
Speaker (R)	Speaker (L)

2Connect the woofer to the amplifier.

Connect the SPEAKER IN terminals of the woofer to the amplifier’s speaker terminals (B) using speaker cords (supplied).

Amplifier

SPEAKER B

SPEAKER

INOUT

This woofer

When using the double (A + B) sets of speakers, make sure that you select the “A + B” position with your amplifier.

Note

When you are using speaker terminal (A) only (front speaker only) or when the power of the amplifier is turned off, turn down the volume or turn off the power of the woofer otherwise, hum noise may be heard.