18

 

 

Settings and adjustments (continued)

 

 

 

 

 

 

 

 

Audio Settings (Audio Setup)

“Audio Setup” allows you to adjust your audio settings according to the playback conditions. The default settings are underlined.

Select “Audio Setup” in the Setup display.

xAudio Digital Out

Switches the methods of outputting audio signals when you connect with equipment like the following.

• Digital equipment such as a receiver

(amplifier) with a digital connector

• Audio equipment with a built-in decoder

xDolby Digital

Selects the Dolby Digital signals to be output via the DIGITAL OUT (OPTICAL) connector.

• On : when the console is connected to audio

equipment with a built-in Dolby Digital

decoder.

If the console is connected to audio

equipment without a built-in Dolby Digital

decoder, do not turn this option on.

Otherwise, when you play the Dolby Digital

sound track, a loud noise (or no sound) will

come out from the speakers, possibly hurting

your ears or damaging the speakers.

• Off : when the console is connected to audio

equipment without a built-in Dolby Digital

xMPEG

Selects the MPEG AUDIO signals to be output via the DIGITAL OUT (OPTICAL) connector.

•On : when the console is connected to audio equipment with a built-in MPEG decoder. If the console is connected to audio equipment without a built-in MPEG decoder, do not turn this option on. Otherwise, when you play the MPEG sound track, a loud noise (or no sound) will come out from the speakers, possibly hurting your ears or damaging the speakers.

•Off : when the console is connected to audio equipment without a built-in MPEG decoder.

xDVD Volume

If the audio output level of the DVD is low, you can turn up the volume of the DVD. (Note: DIGITAL OUT (OPTICAL) must be set to “Off” to access this function).

•+2 : you can turn up the volume.

•+1 : you can turn up the volume.

•Standard : original audio volume. Normally select this position.

Note

Depending on the DVD, the sound may be distorted if you select “+1” or “+2.”

(Dolby Digital, DTS or MPEG)

• A DAT or MD player, via the DIGITAL OUT

(OPTICAL) connector using an optical digital

cable.

For connection details, see page 6.

You cannot adjust “Dolby Digital,” “DTS” and “MPEG” if you set “DIGITAL OUT (OPTICAL)” to “Off.”

xDIGITAL OUT (OPTICAL)

Selects whether to output signal via the DIGITAL OUT (OPTICAL) connector.

•On : select this when you connect with an optical digital cable (sold separately). Normally select this option.

When you select “On,” you can set “Dolby Digital,” “DTS” and “MPEG.”

•Off : select this when you do not want sound signal to be output via the DIGITAL OUT (OPTICAL) connector.

Note

When you select “Off,” you cannot set “Dolby Digital,” “DTS” and “MPEG.”

decoder.

xDTS

Selects the DTS signals to be output via the DIGITAL OUT (OPTICAL) connector.

•On : when the console is connected to audio equipment with a built-in DTS decoder.

If the console is connected to audio equipment without a built-in DTS decoder, do not turn this option on. Otherwise, when you play the DTS sound track, a loud noise (or no sound) will come out from the speakers, possibly hurting your ears or damaging the speakers.

•Off : when the console is connected to audio equipment without a built-in DTS decoder.

xAudio Track Auto Select Mode

Gives the sound track which contains the highest number of channels priority when you play a DVD on which multiple audio formats (PCM, DTS, Dolby Digital or MPEG AUDIO format) are recorded.

•On : priority given.

•Off : no priority given.

Notes

•When you set this item to “On,” the language may change depending on the “Audio” settings in “Language Setup.”

The “Audio Track Auto Select Mode“ setting has higher priority than the “Audio” settings in “Language Setup” (page 16).

•If you set “DIGITAL OUT (OPTICAL)” to “On” and

“DTS” to “Off” in “Audio Setup,” the DTS sound track is not played even if you set this item to “On” and the highest-numbered audio channel is recorded in DTS format.

•If PCM, DTS, Dolby Digital and MPEG AUDIO sound tracks have the same number of channels, the console selects PCM, Dolby Digital, DTS and MPEG AUDIO sound tracks in this order.

•Depending on the DVD, the audio channel with priority may be predetermined. In this case, you cannot give priority to the DTS, Dolby Digital or MPEG AUDIO format by selecting “On.”

After changing DVD settings

To save your changes, be sure to eject the DVD before pressing the 1/RESET button or turning off the unit with the MAIN POWER switch. Please note that changes will not be saved if you reset or turn off the console without first ejecting the DVD.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.