2 Remove the disc.
3 Place a new disc in the disc tray.4 Press the A button.The disc tray closes.
5 Press the 1(standby)/reset button to reset.(Note: holding the 1/reset button down for any length of time may cause the console to go into standby mode.)
After the5
•The analog controller (DUALSHOCK®2) can be used with PlayStation®2 and PlayStation® format software.
•You can switch between digital and analog modes. When the controller is in analog mode, the following buttons and sticks may operate in analog fashion depending on the features supported by the software title. Refer to the software manual for details.
PlayStation®2 format softwareDirectional buttons, ¢ , a, ✕ , sbuttons, left analog stick, right analog stick, L1, R1, L2, R2 buttons
PlayStation® format softwareLeft analog stick / right analog stick •You can use the vibration function.Using the analog controller (DUALSHOCK®) (sold separately)•The analog controller (DUALSHOCK®) can also be used with PlayStation®2 and PlayStation® format software.
•You can switch between digital and analog modes. When in analog mode, you can enjoy the analog operation of the left analog stick and right analog stick.
PlayStation®2 format software
Left analog stick / right analog stickPlayStation® format software
Left analog stick / right analog stick •You can use the vibration function.
Mode switching and the mode indicatorThe analog controller (DUALSHOCK®2) can be switched between two modes by pressing the analog mode button.
Each time the analog mode button is pressed, the mode changes as follows:Digital mode (indicator: off)
Xx
Analog mode (indicator: red)
Note
Switch to the appropriate mode for use.
Note, however, that some software makes this adjustment automatically. In such cases, the analog mode button is overridden by the software. For details, refer to the software manual.
|
|
|
| 11 | |
|
|
|
|
|
|
|
|
|
|
| |
Vibration function |
| GB | |||
The analog controller (DUALSHOCK®2) |
| /Games | |||
features a vibration function when the function |
| ||||
is supported by the software title. The vibration |
| ||||
function can be set to ON or OFF on the |
| Audio | |||
software option screen. |
| ||||
| CDs | ||||
Notes |
| ||||
|
| ||||
• When the analog controller (DUALSHOCK®2) is not |
|
| |||
being used, turn the console off or unplug the |
|
| |||
controller from the console. |
|
| |||
• Before using the vibration function, please read “Notes |
|
| |||
on safety when using the analog controller |
|
| |||
(DUALSHOCK®2)” on page 3. |
|
| |||
|
|
|
|
| |
Before using the analog |
|
| |||
controller (DUALSHOCK®2) |
|
| |||
|
|
|
|
|
|
After turning the console on, rotate the left and right analog sticks once with your thumbs before starting a game. Do not twist the analog sticks, but rotate as if drawing a circle as shown in the diagram above.
Note
With a
Digital mode (indicator: off) | Analog mode (indicator: red) | |||
|
| L2 button | R2 button | |
L2 button | R2 button | L1 button | R1 button | |
SELECT | START | |||
L1 button | R1 button | button | button | |
SELECT | START |
| ¢ button | |
button | button |
| ||
|
| |||
| ¢ button |
|
| |
|
| Directional | abutton | |
Directional | a button | buttons |
| |
|
| |||
buttons |
|
| ✕ button | |
|
|
| ||
| ✕ button | Left analog stick / | sbutton | |
| sbutton | L3 button* | Right analog stick / | |
ANALOG mode button | ANALOG mode button | R3 button* | ||
Mode indicator: Off | Mode indicator: Red | |||
|
|
* The R3 and L3 buttons function when the sticks are pressed.